Parametric optimization of chrome composite through ultrasonic machining using taguchi approach

被引：5
作者：
Saravanan, K. G. [1 ]
Sivapragasam, A. [1 ]
Prabu, R. [2 ]
Maniraj, S. [3 ]
机构：
[1] Sona Coll Technol Autonomous, Dept Mech Engn, Salem 636005, India
[2] Mahendra Engn Coll Autonomous, Dept Mech Engn, Namakkal 637503, India
[3] Paavai Engn Coll Autonomous, Dept Mech Engn, Namakkal 637018, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2021年 / 45卷
关键词：
Chrome composite; Silicon carbide; XRD test; Taguchi approach; Variance test;
D O I：
10.1016/j.matpr.2020.09.267
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The combination of nickel and chromium has provides better substance properties. In addition to that, the Silicon Carbide (SiC) particulates (weight percentage of 1.50) were mixed to the base alloys to enhance the further substance properties. The tensile strength and density of the composite was increased. The chemical composition was validated through Energy Dispersive Spectroscopy (EDS) test. The chrome composite was drilled by ultrasonic vibrations. The voltage, slurry concentration and abrasive grit size was chosen for control factors. The Material Removal Rate (MRR) was determined through the combinations of control factors. Taguchi approach was used to optimize the ultrasonic machining factors. The factors effects have been discussed through variance test and Pareto chart. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the International Conference on Advances in Materials Research-2019.
引用
收藏
页码：1975 / 1978
页数：4
相关论文
共 50 条
  • [1] Modeling and optimization of Al/SiCp MMC machining using Taguchi approach
    Sahoo, Ashok Kumar
    Pradhan, Swastik
    MEASUREMENT, 2013, 46 (09) : 3064 - 3072
  • [2] Optimization of machining parameters by Taguchi approach for machining of aluminium based metal matrix composite by abrasive water jet machining process
    Shunmugasundaram, M.
    Reddy, M. Yadi
    Kumar, A. Praveen
    Rajanikanth, K.
    MATERIALS TODAY-PROCEEDINGS, 2021, 47 : 5928 - 5933
  • [3] Parameters Optimization of Rotary Ultrasonic Machining of Zirconia Ceramic for Surface Roughness Using Statistical Taguchi's Experimental Design
    Abdo, Basem M. A.
    Darwish, S. M.
    El-Tamimi, A. M.
    FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2, 2012, 184-185 : 11 - 17
  • [4] Parameters Optimization of Rotary Ultrasonic Machining of Glass Lens for Surface Roughness Using Statistical Taguchi's Experimental Design
    Lee, Muhammad Hisyam
    Sudin, Izman
    Ken, Goh Eng
    Zaharim, Azami
    APPLIED AND COMPUTATIONAL MATHEMATICS, 2ND EDITION, 2008, : 214 - +
  • [5] Process parametric optimization toward augmentation of silica yield using Taguchi technique and artificial neural network approach
    Pathak, Uttarini
    Kumari, Snehlata
    Kumar, Anuj
    Mandal, Tamal
    ENERGY ECOLOGY AND ENVIRONMENT, 2020, 5 (04) : 294 - 312
  • [6] Optimization of safflower oil transesterification using the Taguchi approach
    Kumar, N.
    Mohapatra, S. K.
    Ragit, S. S.
    Kundu, K.
    Karmakar, R.
    PETROLEUM SCIENCE, 2017, 14 (04) : 798 - 805
  • [7] Process parametric optimization toward augmentation of silica yield using Taguchi technique and artificial neural network approach
    Uttarini Pathak
    Snehlata Kumari
    Anuj Kumar
    Tamal Mandal
    Energy, Ecology and Environment, 2020, 5 : 294 - 312
  • [8] Optimization of safflower oil transesterification using the Taguchi approach
    N.Kumar
    S.K.Mohapatra
    S.S.Ragit
    K.Kundu
    R.Karmakar
    Petroleum Science, 2017, (04) : 798 - 805
  • [9] Specific energy optimization in sawing of rocks using Taguchi approach
    Karakurt, Izzet
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2014, 21 (01) : 365 - 372
  • [10] Specific energy optimization in sawing of rocks using Taguchi approach
    Izzet Karakurt
    Journal of Central South University, 2014, 21 : 365 - 372
12345