Degradation of high-temperature oxidation resistance for Ni-based alloys by re addition and the optimization of Re/Al content

被引:34
作者
Moniruzzáman, M [1 ]
Maeda, M [1 ]
Murata, Y [1 ]
Morinaga, M [1 ]
机构
[1] Nagoya Univ, Grad Sch Engn, Dept Mat Sci & Engn, Chikusa Ku, Nagoya, Aichi 4648603, Japan
关键词
Ni-based superalloy; high-temperature oxidation resistance; Re effect;
D O I
10.2355/isijinternational.43.386
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
High-temperature oxidation tests were conducted with two groups of Ni-based superalloys in order to elucidate the Re effect on oxidation resistance. One group of alloys was the Ni-8Cr-2Ti-10Al-Re system, characterized by 10mol% Al content. The other group of alloys was the Ni-8Cr-2Ti-15Al-Re system, characterized by 15 mol% Al content. The alloy compositions were chosen with the aid of the d-electrons concept, so that any undesirable phases would not appear in the microstructure. Both cyclic and isothermal oxidation tests were carried out at 1373 K for a total time of 720 ks. The oxidation resistance decreased clearly with increasing Re content in the 10-Al series alloys, but did not in the 15-Al series alloys. The alloys having a Re/Al ratio (mol%) up to 0.1 exhibited very small mass change by oxidation, so the Re/Al ratio was indeed a good indication for the design of superalloys having a good oxidation resistance.
引用
收藏
页码:386 / 393
页数:8
相关论文
共 15 条
[1]  
Cetel A.D., 1988, SUP 1988 6 INT S TMS, P235
[2]  
ERICKSON DL, 1994, MAT ADV POWER ENG 19, P1055
[3]  
Erickson GL, 1996, SUPERALLOYS 1996, P35
[4]  
KOIZUMI Y, 1998, MAT ADV POWER ENG 19, P1089
[5]  
MATSUGI K, 1992, SUPERALLOYS 1992, P307
[6]   Prospect of nickel-based superalloys with low Cr and high Re contents [J].
Moniruzzaman, M ;
Murata, Y ;
Morinaga, M ;
Aoki, N ;
Hayashida, T ;
Hashizume, R .
ISIJ INTERNATIONAL, 2002, 42 (09) :1018-1025
[7]   SOLID SOLUBILITIES IN TRANSITION-METAL-BASED FCC ALLOYS [J].
MORINAGA, M ;
YUKAWA, N ;
EZAKI, H ;
ADACHI, H .
PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 1985, 51 (02) :223-246
[8]  
Morinaga M., 1984, SUP 1984 5 INT S TMS, P523, DOI [10.7449/1984/Superalloys_1984_523_532, DOI 10.7449/1984/SUPERALLOYS_1984_523_532]
[9]  
Murata Y, 2000, SUPERALLOYS 2000, P285
[10]  
Sarioglu C, 1996, SUPERALLOYS 1996, P71, DOI 10.7449/1996/Superalloys_1996_71_80