Preparation and damping properties of fly ash filled epoxy composites

被引：38

作者：

Gu, Jian ^{[1
]}

Wu, Gaohui ^{[1
]}

Zhang, Qiang ^{[1
]}

机构：

[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2007年 / 452卷 / 614-618期

关键词：

damping; composites; fly ash; glass transition temperature; low density;

D O I：

10.1016/j.msea.2006.11.006

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

With the purpose of characterizing the high damping properties of the promising low density epoxy/fly ash composites, a series of epoxy composites filled with fly ash of different volume fraction are prepared in this work. Damping tests of cured epoxy composites are performed in the temperature range from -40 to 150 degrees C and in the frequency range from 10 to 800 Hz by using a tension-compression mode. The results show that the values of tangent delta (tan delta) reach their peak values at the glass transition temperatures for the composites with 30-50 vol.% fly ash, and the tan delta values attenuate slowly with the increase of frequency, which indicates that the damping properties of such composites are better than those of other composites. Scanning electron microscopy is used to observe the fractured surfaces of the composites and clarify the dispersion and distribution of fly ash particulates in the matrix. In addition, the thermogravimetric curves are also employed to characterize the heat-resistant performance of the composites. (c) 2006 Elsevier B.V. All rights reserved.

引用

页码：614 / 618

页数：5

共 15 条

[11] Acoustic properties of cenosphere reinforced cement and asphalt concrete [J].

Tiwari, V ;

Shukla, A ;

Bose, A .

APPLIED ACOUSTICS, 2004, 65 (03) :263-275

[12]

WANG MZ, 2005, CHINA POWDER SCI TEC, V1, P15

[13]

ZEOER C, 1956, ELASTICITY ANELASTIC

[14]

ZWIKKER CW, 1969, SOUND ABSORBING MAT

[15]

[No title captured]

← 1 2 →