Portland 3D Printing of Portland Cement Pastes with Additions of Kaolin, Superplastificant, and Calcium Carbonate

被引：0

作者：

Vergara, Luis A. ^{[1
]}

Colorado, Henry A. ^{[1
,2
]}

机构：

[1] Univ Antioquia UdeA, CCComposites Lab, Calle 70 52-21, Medellin, Colombia

[2] Univ Antioquia, Fac Ingn, Bloque 20,Calle 67 53-108, Medellin, Colombia

来源：

TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS | 2020年

关键词：

3D printing; Additive manufacturing; Portland cement; Mortar; Kaolin; direct ink writing; CONCRETE; PERFORMANCE; DESIGN;

D O I：

10.1007/978-3-030-36296-6_20

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The main goal in this investigation is to develop inexpensive formulations of Portland cement pastes for additive manufacturing using the direct ink writing technique. Kaolin, a superplastificant, and calcium carbonate additions were used as additives and modifiers of the printing material. A total of 3 formulations were developed with acceptable shape stability and finishing of the manufactured parts. Cylindrical samples of 17 mm in diameter and 26 mm of height were built in order to be tested in compression tests. The microstructure was characterized with scanning electron microscopy, density, and compression tests. Results showed one formulation to be the best one, which was associated mainly to an optimal kaolin content as rheology regulator.

引用

页码：217 / 226

页数：10

共 50 条

[31] Developments in Portland cement/GGBS binders for 3D printing applications: Material calibration and structural testing
Suryanto, B.
Higgins, J.
Aitken, M. W.
Tambusay, A.
Suprobo, P.
CONSTRUCTION AND BUILDING MATERIALS, 2023, 407
[32] THE EFFECT OF CALCIUM NITRATE ON THE PROPERTIES OF PORTLAND CEMENT PASTES AND CONCRETE HARDENING AT LOW TEMPERATURES
Kicaite, Asta
Skripkiunas, Gintautas
Pundiene, Ina
CERAMICS-SILIKATY, 2020, 64 (03) : 263 - 270
[33] Porosimetric features of calcium sulfoaluminate and Portland cement pastes: testing protocols and data analysis
Hong, Seongwon
de Bruyn, Kyle
Bescher, Eric
Ramseyer, Chris
Kang, Thomas H-K.
JOURNAL OF STRUCTURAL INTEGRITY AND MAINTENANCE, 2018, 3 (01) : 52 - 66
[34] Morphological Characterization of 3D Porous Scaffolds Based on Portland Cement
Mansur, Alexandra A. P.
Mansur, Herman S.
BIOCERAMICS 21, 2009, 396-398 : 687 - 690
[35] Morphological characterization of 3D porous scaffolds based on portland cement
Mansur, Alexandra A. P.
Mansur, Herman S.
Key Engineering Materials, 2009, 396-398 : 687 - 690
[36] Influence of polycarboxylate superplasticizer and calcium sulfoaluminate cement on the rheology, hydration kinetics, and porosity of Portland cement pastes
Tambara Junior, Luis Urbano Durlo
Lima, Geannina Terezinha dos Santos
Silvestro, Laura
Ruviaro, Artur Spat
Gleize, Philippe Jean Paul
de Azevedo, Afonso Rangel Garcez
JOURNAL OF BUILDING ENGINEERING, 2023, 68
[37] Preparation and characterization of Portland cement pastes with Sm2O3 microparticle additions for neutron shielding applications
Florez, Raul
Colorado, Henry A.
Giraldo, Carlos H. C.
Alajo, Ayodeji
CONSTRUCTION AND BUILDING MATERIALS, 2018, 191 : 498 - 506
[38] THE INFLUENCE OF FLY ASH ADDITIONS ASSOCIATED WITH POLYCARBOXYLATE SUPERPASTICIZER ON THE MAIN PROPERTIES OF PORTLAND CEMENT PASTES AND MORTARS
Munteanu, Carmen
Georgescu, Maria
Moncea, Andreea
REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, 2012, 42 (04): : 350 - 355
[39] Lightweight concrete for 3D-printing with internal curing agent for Portland cement hydration
Inozemtcev, A. S.
Korolev, E., V
Duong, Q.
MAGAZINE OF CIVIL ENGINEERING, 2022, 109 (01):
[40] Comparative analysis of 3D printing of Portland cement mortars with hydroxypropyl methylcellulose and microfibrillated cellulose as viscosity modifying agents
Shoaei, Parham
Gallantree-Smith, Harrison
Pacheco, Victor Martinez
Pamies, Ramon
Kjoniksen, Anna -Lena
Pilehvar, Shima
MATERIALS & DESIGN, 2024, 244

← 1 2 3 4 5 →