Biogas Production and Fundamental Mass Transfer Mechanism in Anaerobic Granular Sludge

被引:7
作者
Afridi, Zohaib Ur Rehman [1 ]
Jing, Wu [2 ]
Younas, Hassan [3 ]
机构
[1] Univ Engn & Technol, US Pakistan Ctr Adv Studies Energy, Peshawar 25000, Pakistan
[2] Tsinghua Univ, Sch Environm, Beijing 100084, Peoples R China
[3] Nanjing Tech Univ, Coll Chem Engn, State Key Lab Mat Oriented Separat, Nanjing 210009, Jiangsu, Peoples R China
关键词
micro reactor; granular sludge; mass transfer; microscopy; bubble production; WASTE-WATER; PERFORMANCE; SIZE; TEMPERATURE; TECHNOLOGY; REACTORS; REMOVAL;
D O I
10.3390/su11164443
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Anaerobic granules are responsible for organic degradation and biogas production in a reactor. The biogas production is entirely dependent on a mass transfer mechanism, but so far, the fundamental understanding remains poor due to the covered surface of the reactor. The study aimed at investigating the fundamental mass transfer characteristics of single anaerobic granules of different sizes using microscopic imaging and analytical monitoring under single and different organic loadings. The experiment was conducted in a micro reactor and mass transfer was calculated using modified Fick's law. Scanning electron microscopy was applied to observe biogas production zones in the granule, and a lab-scale microscope equipped with a camera revealed the biogas bubble detachment process in the micro reactor for the first time. In this experiment, the granule size was 1.32, 1.47, and 1.75 mm, but 1.75 mm granules were chosen for further investigation due to their large size. The results revealed that biogas production rates for 1.75 mm granules at initial Chemical Oxygen Demand (COD) 586, 1700, and 6700 mg/L were 0.0108, 0.0236, and 0.1007 m(3)/kg COD, respectively; whereas the mass transfer rates were calculated as 1.83 x 10(-12), 5.30 x 10(-12), and 2.08 x 10(-11) mg/s. It was concluded that higher organic loading and large granules enhance the mass transfer inside the reactor. Thus, large granules should be preferred in the granule-based reactor to enhance biogas production.
引用
收藏
页数:15
相关论文
共 49 条
[1]   Novel insight of spatial mass transfer conditions of upflow anaerobic reactor [J].
Afridi, Zohaib Ur Rehman ;
Wu, Jing ;
Li, Zhong Hua ;
Akand, Raseduzzman ;
Cao, Zhi Ping ;
Poncin, Souhila ;
Li, Huai Zhi .
JOURNAL OF CLEANER PRODUCTION, 2018, 204 :390-398
[2]   Effects of porous carrier size on biofilm development, microbial distribution and nitrogen removal in microaerobic bioreactors [J].
Ahmad, Muhammad ;
Liu, Sitong ;
Mahmood, Nasir ;
Mahmood, Asif ;
Ali, Muhammad ;
Zheng, Maosheng ;
Ni, Jinren .
BIORESOURCE TECHNOLOGY, 2017, 234 :360-369
[3]   Comparative evaluation of biogas production from Poultry droppings, Cow dung and Lemon grass [J].
Alfa, I. M. ;
Dahunsi, S. O. ;
Iorhemen, O. T. ;
Okafor, C. C. ;
Ajayi, S. A. .
BIORESOURCE TECHNOLOGY, 2014, 157 :270-277
[4]   Inhibitory effect of heavy metals on methane-producing anaerobic granular sludge [J].
Altas, Levent .
JOURNAL OF HAZARDOUS MATERIALS, 2009, 162 (2-3) :1551-1556
[5]   Biogas upgrading and utilization: Current status and perspectives [J].
Angelidaki, Irini ;
Treu, Laura ;
Tsapekos, Panagiotis ;
Luo, Gang ;
Campanaro, Stefano ;
Wenzel, Henrik ;
Kougias, Panagiotis G. .
BIOTECHNOLOGY ADVANCES, 2018, 36 (02) :452-466
[6]   Assessment of morphology for anaerobic-granular particles [J].
Baloch, M. I. ;
Akunna, J. C. ;
Collier, P. J. .
WATER ENVIRONMENT RESEARCH, 2006, 78 (06) :643-646
[7]   Biogas: A bright idea for Africa [J].
Brown, VJ .
ENVIRONMENTAL HEALTH PERSPECTIVES, 2006, 114 (05) :A300-A303
[8]   Mass transfer enhancement and improved nitrification in MABR through specific membrane configuration [J].
Castrillo, M. ;
Diez-Montero, R. ;
Esteban-Garcia, A. L. ;
Tejero, I. .
WATER RESEARCH, 2019, 152 :1-11
[9]  
CHEN J, 1993, WATER SCI TECHNOL, V28, P171
[10]   Role of mass transfer resistance in overall substrate removal rate in upflow anaerobic sludge bed reactors [J].
Chou, HH ;
Huang, JS .
JOURNAL OF ENVIRONMENTAL ENGINEERING, 2005, 131 (04) :548-556