Asymmetrical flow field-flow fractionation coupled to inductively coupled plasma mass spectrometry for sizing SeNPs for packaging applications

This paper describes the application of Asymmetrical Flow Field-Flow Fractionation (AF(4)) coupled to diode array ldetector (DAD) and inductively coupled plasma mass spectrometry (AF(4)-UV-ICP-MS) to characterize selenium nanoparticles (SeNPs) in an aqueous acrylic adhesive to be used in a multilayer food packaging material. SeNPs were synthesized using a solution-phase approach based on the reduction of selenite with ascorbic acid in presence of different stabilizers compatible with food industry such as polysaccharides (chitosan (poly(o-glucosamine) and hydroxyethylcellulose (HEC)) and non-ionic surfactants (Triton X-100 (t-octylphenoxypolyethoxyethanol), 2,4,7,9-tetramethyl 5decyne-4,7-diol ethoxylate, and isotridecanol ethoxylate). Several parameters such as pH, ascorbic acid and stabilizers concentration, and compatibility of the stabilizer with the adhesive were evaluated. SeNPs suspensions with spherical morphology were obtained except when isotridecanol ethoxylate was employed which provides SeNPs with a nanorod morphology. AF(4)-DAD-ICP-MS was further applied for sizing the different SeNPs preparations. DAD was used as detector for selecting the best AF(4) separation conditions before coupling to ICP-MS to ensure unequivocal identification of NPs. AF(4) calibration with polystyrene latex (PSL) beads of known sizes allowed size determination of the different SeNPs. The following estimated hydrodynamic sizes (expressed as the mean standard deviation, n = 6 replicates) were found: chitosan-SeNPs-(26 +/- 3 nm), TritonX100-SeNPs (22 +/- 10 nm) HEC-SeNPs (91 +/- 8 nm) and 2,4,7,9-tetramethyl 5decyne-4,7-diol ethoxylate-SeNPs (59 +/- 4 nm). The proposed methodology was successfully applied to the characterization in terms of size of aqueous acrylic adhesives containing SeNPs Results from AF(4)-ICP-MS and TEM shown that only those SeNPs obtained with non-ionic surfactants and HEC were compatible with the adhesive. The results reported here evidence the usefulness of AF(4-)ICP-MS as analytical tool for controlling those manufacturing process involving nanoparticles which opens new frontiers in applicability of AF(4)-ICP-MS. (C) 2017 Elsevier B.V. All rights reserved.