Polymeric Membranes With Sufficient Thermo-Mechanical Stability to Deploy Temperature Enhanced Backwash

被引：0

作者：

Aumeier, Benedikt M. ^{[1
,2
]}

Vollmer, Fabian ^{[1
]}

Lenfers, Simon ^{[1
]}

Yuece, Suleyman ^{[1
]}

Wessling, Matthias ^{[1
,3
]}

机构：

[1] Rhein Westfal TH Aachen, Aachener Verfahrenstech, Chem Proc Engn, Forckenbeckstr 51, D-52074 Aachen, Germany

[2] Rhein Westfal TH Aachen, Inst Environm Engn, Mies van der Rohe Str 1, D-52074 Aachen, Germany

[3] DWI Leibniz Inst Interact Mat, Forckenbeckstr 50, D-52074 Aachen, Germany

来源：

CHEMIE INGENIEUR TECHNIK | 2021年 / 93卷 / 09期

关键词：

Alternative membrane cleaning; Material investigation and characterization; Repeated load cycle; Temperature enhanced backwash; Tensile testing;

D O I：

10.1002/cite.202100020

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The alternative membrane cleaning method Temperature Enhanced Backwash exploits elevated temperatures of typically 125 degrees C to realize high shear rate. This exceeds usual operating temperatures by far. Therefore, the thermo-mechanical properties of polymeric membranes were investigated. A repeated load cycle testing was suited and sensitive to detect the failure of membrane material and potting. All tested PES membranes showed to be stable during the repeated load cycle testing. The potting adhesive may be decisive, thus, a tensile test at 125 degrees C is proposed.

引用

页码：1417 / 1422

页数：6

共 50 条

[21] Thermo-mechanical Calibration of a Temperature-Controlled Oedometer
Kirkham, Andrew
Tsiampousi, Aikaterini
Potts, David M.
GEOTECHNICAL TESTING JOURNAL, 2024, 47 (05): : 1165 - 1177
[22] The effect of temperature gradients in thermo-mechanical fatigue testing
Spachtholz, J.
Affeldt, E. E.
Maier, H. J.
Hammer, J.
MATERIALS AT HIGH TEMPERATURES, 2019, 36 (02) : 97 - 103
[23] A CRITERION FOR THE EVALUATION OF THE MECHANICAL STABILITY OF POLYMERIC MEMBRANES
DIMOV, A
ISLAM, MA
ACTA POLYMERICA, 1990, 41 (12) : 629 - 630
[24] Thermo-mechanical stability of a cellular assembly of carbon nanotubes in air
Shastry, Vyasa V.
Ramamurty, Upadrasta
Misra, Abha
CARBON, 2012, 50 (12) : 4373 - 4378
[25] Thermo-mechanical stability of porous alumina: effect of sintering parameters
Jayaseelan, DD
Ueno, S
Ohji, T
Kanzaki, S
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2004, 5 (04) : 387 - 392
[26] Lubricant facilitated thermo-mechanical stretching of PTFE and morphology of the resulting membranes
Ranjbarzadeh-Dibazar, Arash
Shokrollahi, Parvin
Barzin, Jalal
Rahimi, Azam
JOURNAL OF MEMBRANE SCIENCE, 2014, 470 : 458 - 469
[27] Molecular dynamics predictions of thermo-mechanical properties of carbon nanotube/polymeric composites
Soleimany, Mohammad Reza
Jamal-Omidi, Majid
Nabavi, Seyed Mehdi
Tavakolian, Majid
INTERNATIONAL NANO LETTERS, 2021, 11 (02) : 179 - 194
[28] Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
Nikzad, M.
Masood, S. H.
Sbarski, I.
MATERIALS & DESIGN, 2011, 32 (06) : 3448 - 3456
[29] Crack growth under thermo-mechanical and temperature gradient loads
Kim, KS
VanStone, RH
ENGINEERING FRACTURE MECHANICS, 1997, 58 (1-2) : 133 - 147
[30] Thermo-mechanical aspects and temperature measurement techniques of bone grinding
Babbar, Atul
Jain, Vivek
Gupta, Dheeraj
MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 1458 - 1462

← 1 2 3 4 5 →