Effect of optimal weld parameters in the microstructure and mechanical properties of autogeneous gas tungsten arc weldments of super-duplex stainless steel UNS S32750

被引：67

作者：

Ramkumar, K. Devendranath ^{[1
]}

Mishra, Debidutta ^{[1
]}

Raj, B. Ganesh ^{[1
]}

Vignesh, M. K.

Thiruvengatam, G. ^{[1
]}

Sudharshan, S. P. ^{[1
]}

Arivazhagan, N.

Sivashanmugam, N. ^{[2
]}

Rabel, Arul Maximus ^{[3
]}

机构：

[1] VIT Univ, Sch Mech & Bldg Sci, Vellore 632014, Tamil Nadu, India

[2] NIT, Dept Mech Engn, Tiruchirappalli, India

[3] Sathyabama Univ, Ctr Nanosci & Nanotechnol, Madras, Tamil Nadu, India

来源：

MATERIALS & DESIGN | 2015年 / 66卷

关键词：

HEAT-AFFECTED ZONE; CORROSION-RESISTANCE; OPTIMIZATION; TOUGHNESS; INPUT;

D O I：

10.1016/j.matdes.2014.10.084

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The present study reported the optimization of process parameters such as current and welding speed to achieve maximum penetration in the bead on plate Gas Tungsten Arc Welding (GTAW) of super-duplex stainless steel thick plates by autogeneous-automatic mode. Two factor three level Taguchi L9 orthogonal array was employed to determine the maximum penetration. A maximum penetration of 3.4439 mm with a heat input of 1.17 kJ/mm was obtained on employing a current of 250 A and a welding speed of 150 mm/min. Experimental investigations including microstructure and mechanical properties characterization of the weldments were determined from the established optimal parameters. The results showed that the tensile strength and the impact toughness of the joints obtained from autogeneous GTAW process were found to be 851 MPa and 150 J respectively. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：356 / 365

页数：10

共 21 条

[1] *AM SOC MET, 1994, ASM SPEC HDB STAINL
[2] [Anonymous], 2004, M60194 STAND NORW
[3] BAXTER CFG, 1993, P INT OFFSH POL ENG, P401
[4] Effect of welding speed on microstructures, mechanical properties and corrosion behavior of GTA-welded AISI 201 stainless steel sheets
Chuaiphan, Wichan
Srijaroenpramong, Loeshpahn
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (02) : 402 - 408
[5] Gideon B., 2008, J. Minerals and Mat. CharacEngg, V7, P247
[6] Optimization of pulsed GTA welding process parameters for the welding of AISI 304L stainless steel sheets
Giridharan, P. K.
Murugan, N.
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 40 (5-6) : 478 - 489
[7] GOOCH T.G., 1991, DUPLEX STAINLESS STE, V1, P325
[8] The effect of gas tungsten arc welding and pulsed-gas tungsten arc welding processes' parameters on the heat affected zone-softening behavior of strain-hardened Al-6.7Mg alloy
Hadadzadeh, Amir
Ghaznavi, Majid Mahmoudi
Kokabi, Amir Hossein
[J]. MATERIALS & DESIGN, 2014, 55 : 335 - 342
[9] Effects of cooling time and alloying elements on the microstructure of the gleeble-simulated heat-affected zone of 22% Cr duplex stainless steels
Hsieh, RI
Liou, HY
Pan, YT
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2001, 10 (05) : 526 - 536
[10] Karunakaran, 2012, INT J ENG TECHNOLOGY, V2, P1908

← 1 2 3 →