PIN-diode diagnostics of pulsed electron beam for high repetition rate mode

This work describes the operating principle and test results of the diagnostics for measuring the pulsed electron beam parameters under repetitive operation mode. The diagnostics is based on a PIN-diode, which is used as a bremsstrahlung detector. The signal from a PIN-diode was converted to a pseudo constant voltage signal which can be measured by a conventional voltmeter. Then the signal acquired by the voltmeter was compared with a reference signal indicating the normal operating regime of the accelerator, thus information about the shot-to-shot reproducibility of the electron beam parameters was given. The system was developed and tested for the ASTRA-M accelerator with the following operating parameters: 470 kV accelerating voltage, 120 ns beam duration and up to 50 pulses per second repetition rate.