Undrained monotonic response of clean and silty sands

被引:263
作者
Murthy, T. G. [1 ]
Loukidis, D.
Carraroy, J. A. H.
Prezzi, M.
Salgado, R.
机构
[1] Purdue Univ, Sch Civil Engn, W Lafayette, IN 47907 USA
[2] Colorado State Univ, Dept Civil Engn, Ft Collins, CO 80523 USA
来源
GEOTECHNIQUE | 2007年 / 57卷 / 03期
关键词
fabric/structure of soils; laboratory tests; sands; shear strength; silts;
D O I
10.1680/geot.2007.57.3.273
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
A series of undrained monotonic triaxial compression tests were performed on Ottawa sand containing 0%, 5%, 10% and 15% of non- plastic silt. The paper focuses on distinctive states of the monotonic undrained response of sands, namely the critical state, the phase transformation state, the quasi- steady state, and the state of undrained instability ( onset of flow liquefaction). Specimens were prepared using slurry deposition and moist tamping to investigate the effect of the initial sand fabric on these states. It was observed that an increase in the non- plastic fines content leads to a downward shift of the critical-state line in the void ratio - mean effective stress space and to an increase of the critical- state friction angle. The present data suggest that the initial fabric of the sand appears to have a significant effect on the undrained behaviour in the early stages of shearing, with its influence vanishing at large strains. Moist- tamped specimens demonstrate considerably larger undrained instability state strength than their slurry- deposited counterparts, and a unique critical state locus is reached by both moist- tamped and slurry- deposited specimens. A mathematical formula that allows the estimation of the mean effective stress at the phase transformation state based on the initial mean effective stress and void ratio is also proposed.
引用
收藏
页码:273 / 288
页数:16
相关论文
共 37 条
[1]   UNDRAINED MONOTONIC AND CYCLIC STRENGTH OF SANDS [J].
ALARCONGUZMAN, A ;
LEONARDS, GA ;
CHAMEAU, JL .
JOURNAL OF GEOTECHNICAL ENGINEERING-ASCE, 1988, 114 (10) :1089-1109
[2]  
[Anonymous], 2013, Standard test methods for density of compacted or sintered powder metallurgy (PM) products using archimedes ' principle, P1, DOI 10.1520/C1585-13.2
[3]   Stress-dilatancy in very loose sand [J].
Been, K ;
Jefferies, M .
CANADIAN GEOTECHNICAL JOURNAL, 2004, 41 (05) :972-989
[4]   A STATE PARAMETER FOR SANDS [J].
BEEN, K ;
JEFFERIES, MG .
GEOTECHNIQUE, 1985, 35 (02) :99-112
[5]   THE CRITICAL STATE OF SANDS [J].
BEEN, K ;
JEFFERIES, MG ;
HACHEY, J .
GEOTECHNIQUE, 1991, 41 (03) :365-381
[6]   A critical state interpretation for the cyclic liquefaction resistance of silty sands [J].
Bouckovalas, GD ;
Andrianopoulos, KI ;
Papadimitriou, AG .
SOIL DYNAMICS AND EARTHQUAKE ENGINEERING, 2003, 23 (02) :115-125
[7]  
Carraro J. A. H., 2004, THESIS PURDUE U
[8]   Liquefaction resistance of clean and nonplastic silty sands based on cone penetration resistance [J].
Carraro, JAH ;
Bandini, P ;
Salgado, R .
JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING, 2003, 129 (11) :965-976
[9]  
CARRARO JAH, 2007, IN PRESS GEOTECH TES
[10]   THE BIOSYNTHESIS OF INSULIN - SOME GENETIC AND EVOLUTIONARY ASPECTS [J].
CHAN, SJ ;
KWOK, SCM ;
STEINER, DF .
DIABETES CARE, 1981, 4 (01) :4-10