Effect of forging on the microstructure and tensile properties of 2024Al/Al18B4O33w composite

被引：7

作者：

Shi, W. C. ^{[1
]}

Yuan, L. ^{[1
]}

Zheng, Z. Z. ^{[1
]}

Shan, D. B. ^{[1
]}

机构：

[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Heilongjiang, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2014年 / 615卷

关键词：

Metal matrix composite; Forging; Elevated temperature; Microstructure; Tensile properties; ALUMINUM-MATRIX COMPOSITES; MECHANICAL-PROPERTIES; FRACTURE-BEHAVIOR; ALLOY COMPOSITES; WHISKER; EXTRUSION; DIE; SUPERPLASTICITY; COMPRESSION; TEMPERATURE;

D O I：

10.1016/j.msea.2014.07.092

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The hot forging of the 2024Al/Al(18)B(4)O(33)w composite fabricated by the squeeze casting technique was carried out at 450 degrees C to improve the ductility. The microstructure and tensile properties of the as-cast and forged 2024Al/Al(18)B(4)O(33)w composites are studied. Non-homogeneous distribution of the reinforcement whiskers was revealed in the as-cast composite. The forging led to significant variations in the average length and distribution of the reinforcement whiskers in comparison with the as-cast composite. After forging, the tensile tests showed an increase in the ultimate tensile strength at room temperature and a decrease at elevated temperature. The forging highly increased the ductility both at room and elevated temperature. (C) 2014 Elsevier B.V. All rights reserved.

引用

页码：313 / 319

页数：7

共 50 条

[1] Effect of whisker breakage on the forgeability and the tensile properties of the forged 2024Al/Al18B4O33w composite
Shi, Wenchao
Shan, Debin
MATERIALS CHARACTERIZATION, 2018, 135 : 303 - 310
[2] The effect of matrix hardening on the strength of the extruded 2024Al/Al18B4O33w composite
Shi, Wenchao
Yuan, Lin
Xu, Fuchang
Zheng, Zhenzhu
Shan, Debin
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 672 : 226 - 235
[3] Microstructure of laser melted Al18B4O33w/2024Al composite
Hu, Jin
Liu, Gang
Zhang, Jixiu
Kong, Lingchao
Fei, Weidong
APPLIED SURFACE SCIENCE, 2006, 253 (05) : 2792 - 2795
[4] Effect of the aspect ratio of whisker on work hardening rate of as forged 2024Al/Al18B4O33w composite
Yuan, Lin
Shi, Wenchao
Zheng, Zhenzhu
Shan, Debin
MATERIALS CHARACTERIZATION, 2015, 104 : 73 - 80
[5] The effect of YAG laser surface treatment on corrosion resistance of Al18B4O33w/2024Al composite
Hu, J.
Wu, P. L.
Kong, L. C.
Liu, G.
MATERIALS LETTERS, 2007, 61 (29) : 5181 - 5183
[6] Effect of deformation temperature and degree on tensile properties of the extruded 2024Al/Al18B4O33w composite with extrusion - forging multistage hot deformationAuswirkung der Verformungstemperatur und des Verformungsgrades auf die Zugfestigkeitseigenschaften des stranggepressten 2024Al/Al18B4O33w-Verbundwerkstoffs mit mehrstufiger Warmverformung durch Strangpressen und Schmieden
Shi, W. C.
Chen, A.
Cui, B. S.
Gong, D. M.
Xue, C. M.
Xu, F.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2023, 54 (02) : 238 - 243
[7] Improvement in the corrosion resistance of Al18B4O33w/2024Al composite by laser surface treatment
Hu, J.
Liu, G.
Li, Z. J.
Kong, L. C.
APPLIED SURFACE SCIENCE, 2007, 253 (10) : 4524 - 4530
[8] The effects of Mg contents on microstructure and tensile properties of Al18B4O33w/Al-Mg composites
Wang, Zhenling
Tang, Shawei
Yu, Yucheng
Hu, Jin
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 779 : 404 - 411
[9] The role of local intensive heating on microstructure of 2024Al/Al18B4O33w composite deformed with strain rate > 0.01 s-1
Shi, Wenchao
Yuan, Lin
Shan, Debin
MATERIALS CHARACTERIZATION, 2019, 153 : 115 - 120
[10] Increased hot forgeability of 2024Al/Al18B4O33w whisker composites at high strain rates
Yuan, Lin
Shi, Wenchao
Shivpuri, Rajiv
Xu, Fuchang
Shan, Debin
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 243 : 456 - 464

← 1 2 3 4 5 →