Study on the microstructure and creep behavior of Inconel 718 superalloy fabricated by selective laser melting

Horizontal-direction Inconel 718 alloy cylindrical rods were fabricated by selective laser melting (SLM) and subsequently subjected to solution or homogenization plus double aging (SA or HA) treatments. Lever arm creep tests were performed with the creep tensile axis perpendicular to the building direction of the samples with a constant stress of 650 MPa at 650 degrees C. Scanning and transmission microscopy and electron backscatter diffraction were used to clarify the microstructure of the SA and HA samples before and after creep. The experimental results revealed that the average grain sizes of the SA and HA samples were basically the same before creep, and larger gamma' and gamma '' strengthening phases existed in the HA sample. The grains tended to grow, and the higher dislocation density within grains and lower local misorientation values close to the grain boundaries occurred in the HA sample during creep, which contributed to the longer creep rupture life in comparison with the SA sample. The fracture surfaces of the SA and HA samples displayed intergranular features, and the creep voids and micro-cracks were formed around the 8 or Laves phases at the grain boundaries. The creep fracture mechanism was also discussed.