Smelting Reduction of Iron Ore-Coal Composite Pellets

被引：4

作者：

Sah, R. ^{[1
]}

Dutta, S. K. ^{[2
]}

机构：

[1] Smt SR Patel Engn Coll, Mehsana 384170, Gujarat, India

[2] Maharaja Sayajirao Univ Baroda, Fac Tech & Engg, Met & Mat Engg Dept, Vadodara 390001, Gujarat, India

来源：

STEEL RESEARCH INTERNATIONAL | 2010年 / 81卷 / 06期

关键词：

Composite pellet; Cold bonding; Reduction; Smelting; Kinetics; dissolution; Iron ore; Coal; HEARTH FURNACE PROCESS; MOLTEN SLAG; VOLATILE REDUCTION; OXIDE REDUCTION; PREREDUCED IRON; SOLID CARBON; KINETICS; FEO; HEMATITE; MECHANISM;

D O I：

10.1002/srin.200900113

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Smelting reduction of iron ore-coal composite pellets has been carried out in an induction furnace. The pellets, tied with tungsten wire, were immersed into the liquid metal bath. The experiments were carried out in the temperature range of 1713 K to 1733K. For 16-18 mm diameter pellets, it was observed that (i) the time required for complete dissolution in liquid metal bath is 83-90 seconds, (ii) the fraction of reduction for 40 seconds of immersion varied from 0.68-0.87 for Jharia coal pellets and 0.73-0.92 for Bhilai coal pellets, and (iii) the fraction of reduction increases with decreasing Fe/C ratio and increasing immersion period. X-ray diffraction (XRD)of reduced pellets showed that the reduction occurred topochemically. Scanning electron microscopic (SEM) examination of partially reduced pellets evinced the structural changes in pellets. The present investigation aims to assess the effect of Fe/C ratio in pellet, volatile matter in coal, and time of pellet immersion into liquid metal bath on reduction of iron ore-coal composite pellets.

引用

页码：426 / 433

页数：8

共 33 条

[1] EFFECT OF SLAG FOAMING ON THE REDUCTION OF IRON-OXIDE IN MOLTEN SLAG BY GRAPHITE [J].