Evaluation of Volume Fraction of Austenite in Austempering Process of Austempered Ductile Iron

被引:9
作者
Tyrala, Edward [1 ]
Gorny, Marcin [1 ]
Kawalec, Magdalena [1 ]
Muszynska, Anna [1 ]
Lopez, Hugo F. [2 ]
机构
[1] AGH Univ Sci & Technol, Fac Foundry Engn, Reymonta St 23, PL-30059 Krakow, Poland
[2] Univ Wisconsin, Dept Mat Sci & Engn, 3200 N Cramer St, Milwaukee, WI 53211 USA
关键词
ADI; austenite; magnetic field; austempering; HEAT-TREATMENT; MECHANICAL-PROPERTIES; KINETICS; SIMULATION;
D O I
10.3390/met9080893
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In the present work, an evaluation of the volume fraction of austenite in austempered ductile iron (ADI) is presented by means of three different methods. Experimental tests were conducted on ADI samples after different austempering conditions and contained different volume fractions of the phase components in the metallic matrix (ferrite plates + austenite). A comparison of the volume fraction of austenite was carried out by metallographic magnetic methods using a variable field, as well as X-ray quantitative phase analysis. The main purpose of this work is to show the effectiveness of the proposed magnetic method for estimating the volume fraction of austenite in ADI cast iron. It is evident that the new method in which variable magnetic fields are used to quantify the phase composition exhibits very high accuracy within the second stage of the austempering transformation, in which the metallic matrix consists of ferrite plates and high-carbon austenite. Finally, this research shows that within the first and third stages the estimation of the volume fraction of the austenite is hampered by errors resulting from the presence of martensite (first stage) and carbide phases (third stage).
引用
收藏
页数:10
相关论文
共 23 条
[1]  
Arab N., 2011, J AM SCI, V7, P49
[2]  
Bamberger M, 2016, ENCY IRON STEEL THEI, V5, P196, DOI [10.1081/E-EISA-120049841, DOI 10.1081/E-EISA-120049841]
[3]   USE OF PUBLISHED EXPERIMENTAL RESULTS TO VALIDATE APPROACHES TO GRAY AND DUCTILE IRON MECHANICAL PROPERTIES PREDICTION [J].
Biswas, Siddhartha ;
Monroe, Charles ;
Prucha, Thomas .
INTERNATIONAL JOURNAL OF METALCASTING, 2017, 11 (04) :656-674
[4]   Sensitivity of Austempering Heat Treatment of Ductile Irons to Changes in Process Parameters [J].
Boccardo, A. D. ;
Dardati, P. M. ;
Godoy, L. A. ;
Celentano, D. J. .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2018, 49 (03) :1522-1536
[5]   Numerical Simulation of Austempering Heat Treatment of a Ductile Cast Iron [J].
Boccardo, Adrian D. ;
Dardati, Patricia M. ;
Celentano, Diego J. ;
Godoy, Luis A. ;
Gorny, Marcin ;
Tyrala, Edward .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2016, 47 (01) :566-575
[6]   Influence of microalloying and heat treatment on the kinetics of bainitic reaction in austempered ductile iron [J].
Bosnjak, B ;
Radulovic, B ;
Pop-Tonev, K ;
Asanovic, V .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2001, 10 (02) :203-211
[7]   Austempering Kinetics of Cu-Ni Alloyed Austempered Ductile Iron [J].
Cekic, Olivera Eric ;
Sidjanin, Leposava ;
Rajnovic, Dragan ;
Balos, Sebastian .
METALS AND MATERIALS INTERNATIONAL, 2014, 20 (06) :1131-1138
[8]  
DARWISH N, 1993, MATER SCI TECH SER, V9, P586, DOI 10.1179/026708393790172268
[9]  
DARWISH N, 1993, MATER SCI TECH SER, V9, P882, DOI 10.1179/026708393790171449
[10]  
DARWISH N, 1993, MATER SCI TECH SER, V9, P572, DOI 10.1179/026708393790172286