Design and Performance of Slurry Erosion Tester

被引：36

作者：

Abouel-Kasem, A. ^{[1
]}

Abd-elrhman, Y. M. ^{[1
]}

Emara, K. M. ^{[1
]}

Ahmed, S. M. ^{[1
]}

机构：

[1] Assiut Univ, Fac Engn, Dept Mech Engn, Assiut 71516, Egypt

来源：

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME | 2010年 / 132卷 / 02期

关键词：

slurry erosion; erodent-target dynamics; painting; erosion patterns; particles rebound effect; WEAR; MECHANISMS; CORROSION; BEHAVIOR; COATINGS; VELOCITY; ANGLE;

D O I：

10.1115/1.4001449

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A slurry whirling arm erosion test ring was constructed and a series of erosion tests and post-erosion analysis were carried out using a paint erosion indication technique. The pattern of the paint removal presented a highly visual and accelerated map for the erosion process and its behavior. Also, the erosion rate of paint removal was investigated under a number of erosion variables. It was observed that the rebounding of the erodent particles from the sample surface play an important role in developing erosion for this tester. The erosion pattern showed that the effect of the rebound particles depends on the impact velocity and impingement angle. It was also observed that the erosion behavior of paint as a function of impingement angle, impact velocity, and erosion time was similar to that reported in literature for engineering materials. The slurry whirling arm erosion tester seems to be promising for simulating the slurry process in real cases. [DOI: 10.1115/1.4001449]

引用

页码：1 / 10

页数：10

共 33 条

[1]

Ahmed S.M., 1999, B ASSIUT U, V27, P231

[2] Effect of impingement angle on slurry erosion behaviour and mechanisms of 1017 steel and high-chromium white cast iron [J].

Al-Bukhaiti, M. A. ;

Ahmed, S. M. ;

Badran, F. M. F. ;

Emara, K. M. .

WEAR, 2007, 262 (9-10) :1187-1198

[3]

ALBKHAITI MA, 2004, J EGYPTIAN SOC TRIBO, V1, P15

[4]

BITTER JG, 1993, WEAR, V6, P167

[5] Erosion of polymer-particle composite coatings by liquid water jets [J].

Briscoe, BJ ;

Pickles, MJ ;

Julian, KS ;

Adams, MJ .

WEAR, 1997, 203 :88-97

[6] Effect of impact angle on the slurry erosion-corrosion of 304L stainless steel [J].

Burstein, GT ;

Sasaki, K .

WEAR, 2000, 240 (1-2) :80-94

[7]

Clark H. M., 1993, TRIBOLOGY, V1199, P113

[8] ON THE IMPACT RATE AND IMPACT ENERGY OF PARTICLES IN A SLURRY POT EROSION TESTER [J].

CLARK, HM .

WEAR, 1991, 147 (01) :165-183

[9] A re-examination of the 'particle size effect' in slurry erosion [J].

Clark, HM ;

Hartwich, RB .

WEAR, 2001, 248 (1-2) :147-161

[10] Microripple formation and removal mechanism of ceramic materials by solid-liquid slurry erosion [J].

Fang, Q ;

Sidky, PS ;

Hocking, MG .

WEAR, 1998, 223 (1-2) :93-101

← 1 2 3 4 →