Microstructural and mechanical characteristics of recycled hard metals for cutting tools

被引：11
|
作者：
Faga, M. G. [2 ]
Mattioda, R. [3 ]
Settineri, L. [1 ]
机构：
[1] Politecn Torino, Dept Prod Syst & Business Econ, I-10129 Turin, Italy
[2] CNR, Inst Sci & Technol Ceram, I-10135 Turin, Italy
[3] Wolframcarb, I-10081 Castellamonte, TO, Italy
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2010年 / 59卷 / 01期
关键词：
Cutting tool; Carbide; Recycling; CEMENTED CARBIDE TOOLS; OXIDATION; DRY;
D O I：
10.1016/j.cirp.2010.03.052
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
WC-Co-based materials are widely used for cutting tools, however, powders for the materials preparation are rare and research is addressed to recycle worn materials. This paper presents a comparison between recycled and traditionally prepared WC-Co-based materials for cutting tools. Evaluation of efficiency in turning with application to 100Cr6. AISI 304 and Inconel 718 was considered, using uncoated and PACVD coated tools. Results show that carbides produced via recycling presented some residual porosity and larger grain size distribution, with different performance in cutting. Coating minimises the differences in performance between recycled and traditional hard metal tools. (C) 2010 CIRP.
引用
收藏
页码：133 / 136
页数：4
相关论文
共 50 条
  • [31] Comparative study of mechanical characteristics of recycled PET fibres for automobile seat cover application
    Albini, Giulia
    Brunella, Valentina
    Placenza, Bartolomeo
    Martorana, Brunetto
    Lambertini, Vito Guido
    JOURNAL OF INDUSTRIAL TEXTILES, 2019, 48 (06) : 992 - 1008
  • [32] Hard and wear-resistant titanium nitride coatings deposited by pulsed high energy density plasma for cutting tools
    Peng, ZJ
    Miao, HZ
    Qi, LH
    Gong, JH
    Yang, SZ
    Liu, CZ
    ACTA METALLURGICA SINICA, 2003, 39 (06) : 561 - 564
  • [33] Hard and wear-resistant titanium nitride films for ceramic cutting tools by pulsed high energy density plasma
    Peng, ZJ
    Miao, HZ
    Wang, W
    Yang, S
    Liu, C
    Qi, LH
    SURFACE & COATINGS TECHNOLOGY, 2003, 166 (2-3) : 183 - 188
  • [34] Micro-cutting characteristics of EDM fabricated high-precision polycrystalline diamond tools
    Zhang, Zhiyu
    Peng, Huanming
    Yan, Jiwang
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013, 65 : 99 - 106
  • [35] Cutting characteristics of PVD-coated tools deposited by filtered arc deposition (FAD) method
    Hosokawa, Akira
    Hoshino, Goushi
    Koyano, Tomohiro
    Ueda, Takashi
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2018, 67 (01) : 83 - 86
  • [36] The characteristics of CVD- and PVD-coated carbide tools in hard turning of AISI 4340
    Ginting, A.
    Skein, R.
    Cuaca, D.
    Herdianto
    Pieter
    Masyithah, Z.
    MEASUREMENT, 2018, 129 : 548 - 557
  • [37] The influence of recycled cold set on the mechanical properties and surface characteristics of molds used in casting process
    da Silva, Christian Egidio
    Oliveira, Diego Luiz
    Silidonio Junior, Luiz Carlos
    Rivaroli Junior, Amir
    REM-REVISTA ESCOLA DE MINAS, 2012, 65 (01) : 73 - 78
  • [38] Investigation of mechanical, thermal and recycled characteristics of reinforced ternary blends of LDPE/LLDPE/HDPE by ANOVA
    Maleki, Mahnam
    Farzin, Mahmud
    Mosaddegh, Peiman
    MATERIALS RESEARCH EXPRESS, 2018, 5 (06):
  • [39] Enhancing the microstructural homogeneity and mechanical properties of recycled 7xxx series Al extrudates via grain refiner addition
    Jin, Sang-Cheol
    An, Gun Woong
    Kim, Hyung Jun
    Yoon, Jae Hoon
    Park, Ki Tae
    Song, Kyung Hwan
    Son, Ki Doc
    Lee, Jeong Hun
    Park, Sung Hyuk
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 35 : 5809 - 5817
  • [40] Hard and wear-resistant titanium nitride coatings for cemented carbide cutting tools by pulsed high energy density plasma
    Peng, ZJ
    Miao, HZ
    Qi, LH
    Yang, S
    Liu, CZ
    ACTA MATERIALIA, 2003, 51 (11) : 3085 - 3094
12345