Microstructural and mechanical characteristics of recycled hard metals for cutting tools

被引：11
|
作者：
Faga, M. G. [2 ]
Mattioda, R. [3 ]
Settineri, L. [1 ]
机构：
[1] Politecn Torino, Dept Prod Syst & Business Econ, I-10129 Turin, Italy
[2] CNR, Inst Sci & Technol Ceram, I-10135 Turin, Italy
[3] Wolframcarb, I-10081 Castellamonte, TO, Italy
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2010年 / 59卷 / 01期
关键词：
Cutting tool; Carbide; Recycling; CEMENTED CARBIDE TOOLS; OXIDATION; DRY;
D O I：
10.1016/j.cirp.2010.03.052
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
WC-Co-based materials are widely used for cutting tools, however, powders for the materials preparation are rare and research is addressed to recycle worn materials. This paper presents a comparison between recycled and traditionally prepared WC-Co-based materials for cutting tools. Evaluation of efficiency in turning with application to 100Cr6. AISI 304 and Inconel 718 was considered, using uncoated and PACVD coated tools. Results show that carbides produced via recycling presented some residual porosity and larger grain size distribution, with different performance in cutting. Coating minimises the differences in performance between recycled and traditional hard metal tools. (C) 2010 CIRP.
引用
收藏
页码：133 / 136
页数：4
相关论文
共 50 条
  • [1] Mechanical impact test methods for hard coatings of cutting tools: a review
    Tianxiang Wang
    Xuming Zha
    Fengbiao Chen
    Jue Wang
    Yousheng Li
    Feng Jiang
    The International Journal of Advanced Manufacturing Technology, 2021, 115 : 1367 - 1385
  • [2] Mechanical impact test methods for hard coatings of cutting tools: a review
    Wang, Tianxiang
    Zha, Xuming
    Chen, Fengbiao
    Wang, Jue
    Li, Yousheng
    Jiang, Feng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 115 (5-6) : 1367 - 1385
  • [3] Hard coatings on cutting tools
    L. A. Ivashchenko
    G. V. Rusakov
    V. I. Ivashchenko
    O. K. Porada
    Powder Metallurgy and Metal Ceramics, 2004, 43 : 606 - 610
  • [4] Hard coatings on cutting tools
    Ivashchenko, LA
    Rusakov, GV
    Ivashchenko, VI
    Porada, OK
    POWDER METALLURGY AND METAL CERAMICS, 2004, 43 (11-12) : 606 - 610
  • [5] Cutting Characteristics of PVD Coated Cutting Tools
    Gupta, Kolla Meheresh
    Ramdev, Kamakoti
    Dharmateja, Sai
    Sivarajan, S.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (05) : 11260 - 11267
  • [6] Trends in cutting materials and tools for hard machining
    Slovak University of Technology in Bratislava, Institute of Production Technology, Trnava, Slovakia
    Baranek, I. (ivan.baranek@stuba.sk), 1600, Trans Tech Publications Ltd (474): : 236 - 241
  • [7] Hard to cut metal alloys machining: Aspects of cooling strategies, cutting tools and simulations
    Akeel, Ameer Mohamed
    Kumar, Ramanuj
    Chandrasekhar, P.
    Panda, Amlana
    Sahoo, Ashok Kumar
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 3208 - 3212
  • [8] Effect of the thermal cycle of production of bimetallic cutting tools on the structure and mechanical characteristics of the fusion zone
    I. V. Mozgovoi
    E. A. Shneider
    Metal Science and Heat Treatment, 2011, 53
  • [9] EFFECT OF THE THERMAL CYCLE OF PRODUCTION OF BIMETALLIC CUTTING TOOLS ON THE STRUCTURE AND MECHANICAL CHARACTERISTICS OF THE FUSION ZONE
    Mozgovoi, I. V.
    Shneider, E. A.
    METAL SCIENCE AND HEAT TREATMENT, 2011, 53 (3-4) : 195 - 198
  • [10] Hard-alloy coating for cutting and pressing tools by electric impulse technology
    Novikov, Sergey V.
    Peretyagin, Pavel Yu
    Pristinskiy, Yurii O.
    Fokin, Pavel D.
    Oganyan, Gaik V.
    MECHANICS & INDUSTRY, 2015, 16 (07)
12345