IMPACT OF THE ELECTRIC CABLES INSTALLATION ON THE IGNITION PARAMETERS OF THE SPRUCE WOOD SURFACE

This study is aimed to investigate of an impact of electrical cables installed on Norway spruce (Picea abies (L.) Karst.) wood board surface on main ignition parameters (mainly critical heat flux, ignition temperature, thermal response parameter and thermal inertia). Ignition parameters have been determined by dependence of ignition times (raised to the power of -1, -1/2 and -0.547) on heat flux. Initiation times have been measured for three configurations of spruce wood boards with surface dimensions of 100 x 100 mm +/- 1 mm (the first configuration: board without cables on surface, the second configuration: board with three electrical cables on surface - spacing between cables was equal to their diameter and the third configuration: board with five electrical cables - spacing between cables was equal to their diameter) at five heat fluxes (30, 35, 40, 45 and 50 kW.m(-2)). Obtained results proved that installation of the electrical cables on the spruce wood board surface has a significant impact on the ignition parameters. The critical heat flux (8.5 kW.m(-2)), apparent thermal inertia 0.20 +/- 0.02 kJ(2).m(-4).K-2.s(-1) and ignition temperature 324 +/- 105 degrees C of spruce wood board increased up to 18 +/- 3 kW.m(-2) (critical heat flux), 0.68 +/- 0.03 kJ(2).m(-4).K-2.s(-1) (apparent thermal inertia) and 475 +/- 27 degrees C (ignition temperature) by the installation of electrical cables on the surface of spruce wood board.