Improvement of current limiting capability of HTSC elements in hybrid type SFCL

被引:15
作者
Lim, Sung-Hun [1 ]
Cho, Young-Sun
Choi, Hyo-Sang
Han, Byoung-Sung
机构
[1] Soongsil Univ, Dept Elect Engn, Seoul 156743, South Korea
[2] Chosun Univ, Dept Elect Engn, Kwangju 501759, South Korea
[3] Chonbuk Natl Univ, Dept Elect Engn, Jeonju 561756, South Korea
关键词
current limiting capability; hybrid type superconducting fault current limiter (SFCL); limiting impedance;
D O I
10.1109/tasc.2007.899246
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
We investigated that the current limiting capability of the high-T-C superconducting (HTSC) elements comprising the hybrid type superconducting fault current limiter (SFCL) could be improved with lower power burden for each HTSC element and higher limiting impedance of the SFCL by adjusting the number of turns of the secondary winding. As estimable parameters to confirm it, the resistance and the power loss generated in each HTSC element and the limiting impedance of the SFCL were derived from the electrical equivalent circuit. It was confirmed through the analysis based on the fault current limiting experiments that the power burden of HTSC element in the hybrid type SFCL could be decreased with higher limiting impedance of the SFCL by using a smaller number of turns of secondary windings.
引用
收藏
页码:1807 / 1810
页数:4
相关论文
共 6 条
[1]   Switching properties of a hybrid type superconducting fault current limiter using YBCO stripes [J].
Choi, HS ;
Hyun, OB ;
Kim, HR ;
Park, KB .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2002, 12 (03) :1833-1838
[2]   Shunt-assisted simultaneous quenches in series-connected resistive SFCL components [J].
Hyun, OB ;
Cha, SD ;
Kim, HR ;
Choi, HS ;
Hwang, SD .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2003, 13 (02) :2060-2063
[3]   Improvement of maximum working voltage of resistive fault current limiter using YBCO thin film and metal thin film [J].
Kudo, Y ;
Kubota, H ;
Yoshino, H ;
Wachi, Y .
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2002, 372 :1664-1667
[4]   Fault current limiting characteristics due to winding direction between coil 1 and coil 2 in a flux-lock type SFCL [J].
Lim, SH ;
Choi, HS ;
Han, BS .
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2004, 416 (1-2) :34-42
[5]   The improved hysteresis characteristics of flux-lock type SFCL using third winding [J].
Lim, SH ;
Choi, HS ;
Han, BS .
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2004, 406 (1-2) :37-45
[6]   Quench behavior of YBaCuO films for fault current limiters under magnetic field [J].
Park, KB ;
Kang, JS ;
Lee, BW ;
Oh, IS ;
Choi, HS ;
Kim, HR ;
Hyun, OB .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2003, 13 (02) :2092-2095