Static recrystallisation kinetics of austenite in Ti, Nb and V microalloyed steels during hot deformation

被引：4

作者：

Chatterjee, S. ^{[1
]}

Verma, A. K. ^{[1
]}

Mukhopadhyay, A. ^{[1
]}

机构：

[1] Res & Dev Tata Steel Ltd, Jamshedpur 831001, Jharkhand, India

来源：

IRONMAKING & STEELMAKING | 2007年 / 34卷 / 02期

关键词：

recrystallisation; microalloyed steels; double hit compression tests; interhit time; activation energy; n-value;

D O I：

10.1179/174328107X155231

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Static recrystallisation kinetics during hot deformation of two microalloyed steels (C-Ti-V and C-Ti-Nb) has been quantified. Double hit compression test using a Gleeble 1500 thermomechanical simulator was conducted to determine the recrystallisation kinetics. The kinetics of static recrystallisation was found to be more sluggish in the case of microalloyed steels with niobium additions as compared with other grades of microalloyed steels. The rate of recrystallisation increases with increasing temperature, strain and strain rate. The results are compared with other grades of microalloyed steels, mainly with Ti, Ni and Cu additions, from literature. For niobium containing microalloyed steels, a higher temperature is required for recrystallisation as compared with other microalloyed steels.

引用

页码：145 / 150

页数：6

共 11 条

[1] Recrystallization kinetics of microalloyed steels determined by two mechanical testing techniques [J].

Airaksinen, K ;

Karjalainen, LP ;

Porter, D ;

Perttula, J .

PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MICROALLOYING IN STEELS, 1998, 284-2 :119-126

[2]

Cohen M., 1975, P C MICR 75 WASH DC, P2

[3]

ELLARS CM, 1980, P INT C HOT WORK FOR, P3

[4]

Gladman T., 1997, PHYS METALLURGY MICR, V1st

[5] A MATHEMATICAL-MODEL TO PREDICT THE MECHANICAL-PROPERTIES OF HOT ROLLED C-MN AND MICROALLOYED STEELS [J].

HODGSON, PD ;

GIBBS, RK .

ISIJ INTERNATIONAL, 1992, 32 (12) :1329-1338

[6] STATIC RECRYSTALLIZATION IN AUSTENITE AND ITS INFLUENCE ON MICRO-STRUCTURAL CHANGES IN C-MN STEEL AND VANADIUM MICROALLOYED STEEL AT THE HOT STRIP MILL [J].

MEDINA, SF ;

LOPEZ, V .

ISIJ INTERNATIONAL, 1993, 33 (05) :605-614

[7] Influence of alloying elements in solution on static recrystallization kinetics of hot deformed steels [J].

Medina, SF ;

Mancilla, JE .

ISIJ INTERNATIONAL, 1996, 36 (08) :1063-1069

[8] Static recrystallization modelling of hot deformed steels containing several alloying elements [J].

Medina, SF ;

Mancilla, JE .

ISIJ INTERNATIONAL, 1996, 36 (08) :1070-1076

[9] Processing of low carbon steel plate and hot strip - an overview [J].

Panigrahi, BK .

BULLETIN OF MATERIALS SCIENCE, 2001, 24 (04) :361-371

[10]

TANAKA T, 1975, P MICROALLOYING 75, P107

← 1 2 →