UNDERWATER WET REPAIR WELDING OF API 5L X65M PIPELINE STEEL

被引：25
|
作者：
Rogalski, Grzegorz [1 ]
Fydrych, Dariusz [1 ]
Labanowski, Jerzy [1 ]
机构：
[1] Gdansk Univ Technol, Fac Mech Engn, Gdansk, Poland
来源：
POLISH MARITIME RESEARCH | 2017年 / 24卷
关键词：
underwater welding; wet welding; underwater pipeline; API 5L X65M steel; MECHANICAL-PROPERTIES; FATIGUE-STRENGTH; STAINLESS-STEEL; COLD CRACKING; MICROSTRUCTURE; JOINTS; IMPACT;
D O I：
10.1515/pomr-2017-0038
中图分类号：
U6 [水路运输]; P75 [海洋工程];
学科分类号：
0814 ; 081505 ; 0824 ; 082401 ;
摘要：
This paper presents results of the research of effect of polymer insulation of pipeline made of API 5L X65M steel as well as underwater wet welding parameters on properties of joints made by covered electrodes. Effect of heat input on structure and hardness of joints during repair of underwater pipeline was analyzed. Welding defects like microcracks, micro-lacks of fusion, slag inclusions, as well as HAZ hardness increase over an assumed acceptance criterion for welded joints in pipes without anticorrosion polymer insulation, were identified. A significant effect of polimer insulation on structure and properties of welded joints, was found.
引用
收藏
页码：188 / 194
页数：7
相关论文
共 50 条
  • [41] Charpy Impact Toughness and Transition Temperature for API 5L X52 Seamless Pipeline
    Capula-Colindres, S.
    Teran, G.
    Velazquez, J. C.
    Angeles-Herrera, D.
    Torres-Santillan, E.
    STRENGTH OF MATERIALS, 2024, 56 (01) : 136 - 143
  • [42] Influence of Thermomechanically Controlled Processing on Microstructure and Hydrogen Induced Cracking Susceptibility of API 5L X70 Pipeline Steel
    Enyinnaya Ohaeri
    Joseph Omale
    Ahmed Tiamiyu
    K. M. Mostafijur Rahman
    Jerzy Szpunar
    Journal of Materials Engineering and Performance, 2018, 27 : 4533 - 4547
  • [43] Characterization of Mechanical Properties and Residual Stress in API 5L X80 Steel Welded Joints
    Lins, Amilton de Sousa, Jr.
    Guimares de Souza, Luis Felipe
    Fonseca, Maria Cindra
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (01) : 124 - 137
  • [44] Hardening mechanisms in a high wall thickness sour service pipe steel API 5L X65 before and after post-welding heat treatments
    Morales, E., V
    Betancourt, G.
    Fernandes, J. R.
    Batista, G. Z.
    Bott, I. S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 851
  • [45] Processing of API 5L X70 steel by warm rolling and plasma nitriding
    Aguiar Furtado, Andre Sales
    de Barros Neto, Joao Rodrigues
    Carvalho Serra, Petteson Linniker
    Magalhaes de Sousa, Romulo Ribeiro
    MATERIA-RIO DE JANEIRO, 2020, 25 (02):
  • [46] Evaluation of Microstructure and Mechanical Properties of weld metals obtained by Manual and Automated Welding Process used in the Welding of API 5L X80 Steel
    Albuquerque, Siderley Fernandes
    Maciel, Theophilo Moura
    dos Santos, Marco Antonio
    Bracarense, Alexandre Queiroz
    SOLDAGEM & INSPECAO, 2011, 16 (04): : 322 - 332
  • [47] Effect of post-processing annealing treatments on microstructure development and hydrogen embrittlement in API 5L X70 pipeline steel
    Ohaeri, Enyinnaya
    Omale, Joseph
    Rahman, K. M. Mostafijur
    Szpunar, Jerzy
    MATERIALS CHARACTERIZATION, 2020, 161 (161)
  • [48] Hydrogen induced cracking susceptibility of API 5L X70 pipeline steel in relation to microstructure and crystallographic texture developed after different thermomechanical treatments
    Ohaeri, Enyinnaya
    Szpunar, Jerzy
    Fazeli, Fateh
    Arafin, Muhammad
    MATERIALS CHARACTERIZATION, 2018, 145 : 142 - 156
  • [49] Effect of the girth welding interpass temperature on the toughness of the HAZ of a Ni-based superalloy 625 clad API 5L X65 pipe welded joint
    Moraes, Diogo de Oliveira
    Zumpano Junior, Petronio
    Moraes e Oliveira, Victor Hugo Pereira
    de Oliveira, Aline Capella
    Payao Filho, Joao da Cruz
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 19 : 2556 - 2566
  • [50] Study of Phase Transformations In API 5L X80 Steel in Order to Increase its Fracture Toughness
    Vilarouco Pedrosa, Igor Rafael
    de Castro, Renato Soares
    Yadava, Yogendra Prasad
    Sanguinetti Ferreira, Ricardo Artur
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2013, 16 (02): : 489 - 496
12345