Development of LHPs with ceramic wick

被引：50

作者：

Santos, Paulo H. D. ^{[1
]}

Bazzo, Edson ^{[1
]}

Becker, Susanne ^{[2
]}

Kulenovic, Rudi ^{[2
]}

Mertz, Rainer ^{[2
]}

机构：

[1] Univ Fed Santa Catarina, Dept Mech Engn, Lab Combust & Thermal Syst Engn, BR-88040900 Florianopolis, SC, Brazil

[2] Univ Stuttgart, Dept Energy Convers & Heat Transfer, IKE, Inst Nucl Technol & Energy Syst, D-70569 Stuttgart, Germany

来源：

APPLIED THERMAL ENGINEERING | 2010年 / 30卷 / 13期

关键词：

Ceramic porous wick; LHP; Acetone; Water; LOOP HEAT PIPES;

D O I：

10.1016/j.applthermaleng.2010.04.010

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The ceramic porous wick is proposed as an alternative to wicks made of metal and plastic for Loop Heat Pipes (LHP) applications. Performance tests of two LHPs using acetone and water as working fluids were carried out for power inputs up to 25 W. The evaporators have a stainless steel cylindrical assembly, with 80 mm of length and 10 mm of inner diameter. The ceramic porous wick has 50% of porosity, 1-3 mu m of pore radius distribution and a permeability of about 35 x 10(-15) m(2). The active zone length of the evaporators is 25 mm. For a limited operation temperature of 100 degrees C, the LHPs were able to transfer up to 25 and 15W using acetone and water, respectively, at steady state condition. An operation analysis concerning the effects of the LHP inclination, the heat sink temperature and LHP thermal resistances is also presented. Despite the relative good performance of the LHPs, further researches are still required taking into account changes related to properties of the ceramic porous wick in particular and improvements in the whole LHP design in general. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：1784 / 1789

页数：6

共 13 条

[1] Steady-state and transient performance of a miniature loop heat pipe [J].