Characterization of the Q* parameter for evaluating creep crack growth rate for type 316LN stainless steel

被引：3

作者：

Ekaputra, I. M. W. ^{[1
]}

Kim, Woo-Gon ^{[2
]}

Park, Jae-Young ^{[1
]}

Kim, Seon-Jin ^{[1
]}

Kim, Eung-Seon ^{[2
]}

机构：

[1] Pukyong Natl Univ, Dept Mech Design Engn, Grad Sch, Busan 608739, South Korea

[2] Korea Atom Energy Res Inst, 1045 Daedeok Daero, Taejon 305353, South Korea

来源：

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 2016年 / 30卷 / 07期

基金：

新加坡国家研究基金会;

关键词：

Creep crack growth rate (CCGR); Dual value; Intergranular fracture; Q* parameter; Type 316 LN SS; TEMPERATURE; EVOLUTION; NITROGEN; LIFE;

D O I：

10.1007/s12206-016-0625-4

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this study, the Q* parameter was characterized to evaluate the Creep crack growth rate (CCGR) of type 316LN stainless steel. Creep crack growth (CCG) data were obtained by CCG tests under different applied loads at 600A degrees C. An additional CCG test was conducted at 550A degrees C to investigate the possible temperature dependence of the stress intensity factor. An equation using the Q* parameter for evaluating CCGR was proposed, and this parameter was characterized and compared with the typical C* fracture parameter, which is commonly used. The Q* parameter exhibited good linearity of the data, exhibiting no nonlinearity-induced dual value at the early stage. The Q* parameter was suitable for characterizing the CCGR regardless of different applied loads and types of steels. In addition, fracture microstructures near the crack revealed a typical intergranular fracture mode, and this fracture was dominantly propagated along the grain boundary. The cracks were developed by the growth and interlinking of cavities, which were attributed to the precipitates forming along the grain boundary.

引用

页码：3151 / 3158

页数：8

共 22 条

[11] Probabilistic assessment of creep crack growth rate for Gr. 91 steel
Kim, Woo-Gon
Park, Jae-Young
Hong, Sung-Deok
Kim, Seon-Jin
[J]. NUCLEAR ENGINEERING AND DESIGN, 2011, 241 (09) : 3580 - 3586
[12] A numerical approach to determine creep constants for Time-Temperature Parametric methods
Kim, Woo-Gon
Yin, Song-Nan
Kim, Sung-Ho
Ryu, Woo-Seog
Lee, Chan-Bock
Kim, Seon-Jin
[J]. METALS AND MATERIALS INTERNATIONAL, 2009, 15 (04) : 559 - 564
[13] Time dependent design curves for a high nitrogen grade of 316LN stainless steel for fast reactor applications
Kumar, J. Ganesh
Ganesan, V.
Laha, K.
Mathew, M. D.
[J]. NUCLEAR ENGINEERING AND DESIGN, 2013, 265 : 949 - 956
[14] Improving creep strength of 316L stainless steel by alloying with nitrogen
Mathew, M. D.
Laha, K.
Ganesan, V.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 535 : 76 - 83
[15] Evolution of creep resistant 316 stainless steel for sodium cooled fast reactor applications
Mathew, M. D.
[J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2010, 63 (2-3) : 151 - 158
[16] Ryu W. S., 2003, T 17 INT C STRUCT ME
[17] REPRESENTATION OF THE DISPLACEMENT RATE BETWEEN THE LOADING POINTS IN TERMS OF APPLIED STRESS AND TEMPERATURE AND ITS RELATION TO CREEP CRACK-GROWTH RATE, C-STAR, P AND Q-STAR PARAMETERS
YOKOBORI, AT
TOMIZAWA, H
SAKATA, H
KAKO, T
KURIYAMA, T
[J]. ENGINEERING FRACTURE MECHANICS, 1987, 28 (5-6) : 805 - 816
[18] AN ALTERNATIVE CORRELATING PARAMETER FOR CREEP CRACK-GROWTH RATE AND ITS APPLICATION - DERIVATION OF THE PARAMETER Q-ASTERISK
YOKOBORI, AT
YOKOBORI, T
NISHIHARA, T
YAMAOKA, T
[J]. MATERIALS AT HIGH TEMPERATURES, 1992, 10 (02) : 108 - 118
[19] Comparative study on characterization parameters for high temperature creep crack growth with special emphasis on dual value behaviour of crack growth rate
Yokobori, AT
Yokobori, T
[J]. ENGINEERING FRACTURE MECHANICS, 1996, 55 (03) : 493 - 503
[20] CHARACTERIZATION OF HIGH-TEMPERATURE CREEP CRACK-GROWTH AND CREEP LIFE FROM HIGH-TEMPERATURE DUCTILE THROUGH TO HIGH-TEMPERATURE BRITTLE MATERIALS
YOKOBORI, AT
YOKOBORI, T
NISHIHARA, T
[J]. ENGINEERING FRACTURE MECHANICS, 1991, 40 (4-5) : 737 - 748

← 1 2 3 →