Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders

被引：104

作者：

Berretta, S. ^{[1
]}

Ghita, O. ^{[1
]}

Evans, K. E. ^{[1
]}

机构：

[1] Univ Exeter, Coll Engn Math & Phys Sci, Exeter EX4 4QF, Devon, England

来源：

EUROPEAN POLYMER JOURNAL | 2014年 / 59卷

关键词：

Laser sintering; Particles; Morphology; Polyetheretherketone; Flow; POLYETHERETHERKETONE COMPOSITES; BETA-TCP; GLASS; FABRICATION; DEPOSITION; FORCES;

D O I：

10.1016/j.eurpolymj.2014.08.004

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

In an attempt to expand the range of engineering polymers used for laser sintering, this paper examines the morphology, flowability and interparticle interactions of two commercially available Poly (ether ether) ketone (PEEK) powders, not yet optimised for the LS process, by comparison with the LS optimised Polyamide (PA) and Polyetherketone (PEK) powdered polymers. The effect of incorporating fillers and additives on the flow behaviour is also analysed. The Particle Size Distribution (PSD) results alone do not allow ranking the powder materials in relation to the flow behaviour. The particle morphology has a stronger influence on the flow characteristics for materials with similar PSDs. The work also provides additional characterisation parameters to be considered when analysing IS powders. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：218 / 229

页数：12

共 45 条

[1]

Amado A, P SFF S 2011 AUST TE, P438

[2] Parametric tip model and force-distance relation for Hamaker constant determination from atomic force microscopy [J].

Argento, C ;

French, RH .

JOURNAL OF APPLIED PHYSICS, 1996, 80 (11) :6081-6090

[3]

ASTM, C144400 ASTM

[4] Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection molding [J].

Athreya, Siddharth Ram ;

Kalaitzidou, Kyriaki ;

Das, Suman .

COMPOSITES SCIENCE AND TECHNOLOGY, 2011, 71 (04) :506-510

[5]

Beard MA, INNOVATIVE DEV VIRTU, P329

[6]

Berretta S, 2013, ADV RES VIRTUAL RAPI

[7]

Biron M, 2013, PDL HANDB SER, P1

[8] Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing [J].

Butscher, A. ;

Bohner, M. ;

Hofmann, S. ;

Gauckler, L. ;

Mueller, R. .

ACTA BIOMATERIALIA, 2011, 7 (03) :907-920

[9] Processing and properties of glass bead particulate-filled functionally graded Nylon-11 composites produced by selective laser sintering [J].

Chung, Haseung ;

Das, Suman .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 437 (02) :226-234

[10]

Das S, 2007, NANOTECHNOLOGY, P18

← 1 2 3 4 5 →