Bond behavior of FRP carbon plates externally bonded over steel and concrete elements: Experimental outcomes and numerical investigations

被引：35

作者：

Ceroni, F. ^{[1
]}

Ianniciello, M. ^{[2
]}

Pecce, M. ^{[2
]}

机构：

[1] Univ Napoli Parthenope, Dept Engn, Ctr Direz, Isola C4, I-80143 Naples, Italy

[2] Univ Sannio, Dept Engn, Piazza Roma 21, I-82100 Benevento, Italy

来源：

COMPOSITES PART B-ENGINEERING | 2016年 / 92卷

关键词：

Carbon fiber; Adhesion; Delamination; Finite element analysis (FEA); DESIGN-MODEL; MEMBERS; BEAMS; PART;

D O I：

10.1016/j.compositesb.2016.02.033

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The paper is firstly aimed to furnish a review of the current knowledge about the bond behavior of Fiber Reinforced Plastic (FRP)-steel joints with reference to: a) experimental results of bond tests available in the technical literature, and b) existing strength model for estimating the debonding load. In order to assess the influence of geometrical and mechanical properties of the adhesive on the debonding load, parametric analyses have been carried out by means of some selected bond strength models. The effectiveness of these models has been also checked by means of comparisons with experimental debonding loads collected from technical literature. The second objective of the paper is the comparison of the bond behavior of FRP-steel and FRP-concrete joints in order to identify the role of the adhesive on the bond behavior separately from the concrete. The comparison is aimed to assess bond laws for FRP-concrete joints taking into account the only nonlinearities of the adhesive and to model the concrete as a nonlinear material. To this purpose few experimental bond tests were carried out by the Authors on carbon FRP plates bonded over both steel and concrete support according to the same lay-out and set-up. Finally, basing on the experimental bond law assessed for the FRP-steel joints, a Finite Element (FE) plane model with interface elements is developed for validating the experimental results of bond tests. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：434 / 446

页数：13

共 31 条

[1]

[Anonymous], 1973, ADHESIVE BONDED DOUB

[2]

Azevedo A F M, 2003, P 3 C LUS MOC ENG MA, P81

[3]

Bilotta A., 2011, ACI

[4] Interaction of interface delamination and plasticity in tensile steel members reinforced by CFRP plates [J].

Bocciarelli, Massimiliano ;

Colombi, Pierluigi ;

Fava, Giulia ;

Poggi, Carlo .

INTERNATIONAL JOURNAL OF FRACTURE, 2007, 146 (1-2) :79-92

[5] Fatigue performance of tensile steel members strengthened with CFRP plates [J].

Bocciarelli, Massimiliano ;

Colombi, Pierluigi ;

Fava, Giulia ;

Poggi, Carlo .

COMPOSITE STRUCTURES, 2009, 87 (04) :334-343

[6] Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites [J].

Buyukozturk, O ;

Gunes, O ;

Karaca, E .

CONSTRUCTION AND BUILDING MATERIALS, 2004, 18 (01) :9-19

[7] Modelling of the bond behaviour of tuff elements externally bonded with FRP sheets [J].

Ceroni, Francesca ;

Garofano, Angelo ;

Pecce, Marisa .

COMPOSITES PART B-ENGINEERING, 2014, 59 :248-259

[8] Anchorage strength models for FRP and steel plates bonded to concrete [J].

Chen, JF ;

Teng, JG .

JOURNAL OF STRUCTURAL ENGINEERING, 2001, 127 (07) :784-791

[9]

CNR (National Research Council), 2013, 200R1 CNR DT

[10] Strengthening of tensile steel members and bolted joints using adhesively bonded CFRP plates [J].

Colombi, P ;

Poggi, C .

CONSTRUCTION AND BUILDING MATERIALS, 2006, 20 (1-2) :22-33

← 1 2 3 4 →