The effects of thermo-mechanical treatment on the properties of 2519 aluminum alloy

被引：0
作者：
Lin, Gao-yong [1 ]
Zhang, Zhen-feng [1 ]
Lin, Qi-quan [1 ,2 ]
Peng, Da-shu [1 ]
机构：
[1] Cent S Univ, Coll Mat Sci & Engn, Changsha 410083, Peoples R China
[2] Xiangtan Univ, Coll Mech Engn, Xiangtan 411105, Peoples R China
来源：
2006 BIMW: 2006 BEIJING INTERNATIONAL MATERIALS WEEK, PTS 1-4: MAGNESIUM | 2007年 / 546-549卷
关键词：
2519 aluminum alloy; thermo-mechanical treatment (TMT); mechanical properties; electrochemical corrosion;
D O I：
10.4028/www.scientific.net/MSF.546-549.1027
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A procedure of thermo-mechanical treatment (TMT) was carried out to 2519 aluminum alloy to improve its properties. The influences of cold deformation ratio, ageing temperature and ageing time of the TMT on the mechanical properties and electrochemical corrosion resistance of this alloy were investigated. The results show that after TMT the tensile strength of 2519 aluminum alloy can be improved obviously but its electrochemical corrosion resistance decreases slightly. The optimum processing parameters of the TMT for 2519 aluminum alloy can be described as: solid solution at 530 degrees C for 0.5h, then cold deform with a ratio of 15% followed by aging at 150 degrees C for 10h.
引用
收藏
页码：1027 / +
页数：2
相关论文
共 50 条
[41]   MECHANICAL PROPERTIES OF PRESTRESSING STRANDS AND HOW THEY TEND TO CHANGE UNDER THERMO-MECHANICAL TREATMENT [J].
Korchunov, A. G. ;
Polyakova, M. A. ;
Konstantinov, D., V ;
Dabala, M. .
CIS IRON AND STEEL REVIEW, 2019, 18 :14-19
[42]   Effects of Cold Rolling Reduction Rate on the Microstructure and Properties of Cu-1.16Ni-0.36Cr Alloy after Thermo-Mechanical Treatment [J].
Sun, Wenming ;
Li, Shaolin ;
Song, Kexing ;
Wang, Qiangsong ;
Zhu, Yingying .
MATERIALS, 2023, 16 (19)
[43]   Thermo-mechanical properties of cubic titanium nitride [J].
Mohammadpour, Ehsan ;
Altarawneh, Mohammednoor ;
Al-Nu'airat, Jomana ;
Jiang, Zhong-Tao ;
Mondinos, Nicholas ;
Dlugogorski, Bogdan Z. .
MOLECULAR SIMULATION, 2018, 44 (05) :415-423
[44]   Thermo-mechanical interaction between aluminum alloy and tools with different profiles during friction stir welding [J].
Yang, Min ;
Bao, Rui-jun ;
Liu, Xiu-zhong ;
Song, Chao-qun .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2019, 29 (03) :495-506
[45]   Mechanical properties of Mg-6Gd-1Y-0.5Zr alloy processed by low temperature thermo-mechanical treatment [J].
Li De-jiang ;
Zeng Xiao-qin ;
Xie Yan-cai ;
Wu Yu-juan ;
Ding Wen-jiang ;
Chen Bin .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (10) :2351-2356
[46]   Heterogeneous Microstructure Evolution and Mechanical Properties of a CrCoNiAl1Ti2 Medium-Entropy Alloy by Thermo-Mechanical Treatment [J].
Wu, Wentao ;
Fu, Hua ;
Xia, Ping ;
Gan, Bin ;
Jiang, Naisheng ;
Xia, Min ;
Zhao, Feng .
METALS AND MATERIALS INTERNATIONAL, 2025, 31 (06) :1613-1626
[47]   Effect of nano-TiC/TiB2 and final thermo-mechanical treatment on microstructure and properties of 7185 alloy [J].
Wang, Yin ;
Li, Yong ;
Wang, Haiyao ;
Tang, Hongqun ;
Yu, Wei ;
Li, Jiadong ;
Xu, Guangming .
MATERIALS TODAY COMMUNICATIONS, 2024, 40
[48]   Effect of rolling deformation on microstructure and tensile properties of additively manufactured Al-Cu alloy with thermo-mechanical treatment [J].
Zhang, Tao ;
Qin, Zhenyang ;
Gong, Hai ;
Wu, Yunxin .
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2024, 24 (04)
[49]   Thermo-mechanical processing of high strength β-titanium alloys and effects on microstructure and properties [J].
Sauer, C ;
Luetjering, G .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 117 (03) :311-317
[50]   Effects of microstructural variability on thermo-mechanical properties of a woven ceramic matrix composite [J].
Goldsmith, Marlana B. ;
Sankar, Bhavani V. ;
Haftka, Raphael T. ;
Goldberg, Robert K. .
JOURNAL OF COMPOSITE MATERIALS, 2015, 49 (03) :335-350
12345