The effects of thermo-mechanical treatment on the properties of 2519 aluminum alloy

被引：0
作者：
Lin, Gao-yong [1 ]
Zhang, Zhen-feng [1 ]
Lin, Qi-quan [1 ,2 ]
Peng, Da-shu [1 ]
机构：
[1] Cent S Univ, Coll Mat Sci & Engn, Changsha 410083, Peoples R China
[2] Xiangtan Univ, Coll Mech Engn, Xiangtan 411105, Peoples R China
来源：
2006 BIMW: 2006 BEIJING INTERNATIONAL MATERIALS WEEK, PTS 1-4: MAGNESIUM | 2007年 / 546-549卷
关键词：
2519 aluminum alloy; thermo-mechanical treatment (TMT); mechanical properties; electrochemical corrosion;
D O I：
10.4028/www.scientific.net/MSF.546-549.1027
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A procedure of thermo-mechanical treatment (TMT) was carried out to 2519 aluminum alloy to improve its properties. The influences of cold deformation ratio, ageing temperature and ageing time of the TMT on the mechanical properties and electrochemical corrosion resistance of this alloy were investigated. The results show that after TMT the tensile strength of 2519 aluminum alloy can be improved obviously but its electrochemical corrosion resistance decreases slightly. The optimum processing parameters of the TMT for 2519 aluminum alloy can be described as: solid solution at 530 degrees C for 0.5h, then cold deform with a ratio of 15% followed by aging at 150 degrees C for 10h.
引用
收藏
页码：1027 / +
页数：2
相关论文
共 50 条
[21]   Strengthening and Toughening Mechanisms of 7034 Aluminum Alloy Subjected to Thermo-mechanical Treatment Based on Reciprocating Extrusion [J].
Xue Kemin ;
Zhang Junyuan ;
Yan Siliang ;
Xu Bing ;
Li Ping .
RARE METAL MATERIALS AND ENGINEERING, 2023, 52 (09) :3089-3096
[22]   Effects of Copper Content and Thermo-Mechanical Treatment on Microstructure and Mechanical Properties of AlMgSi(Cu) Alloys [J].
Boczkal, Sonia ;
Korczak, Piotr ;
Zylka, Konrad ;
Limanowka, Kamila ;
Plonka, Bartlomiej ;
Remsak, Krzysztof ;
Szymanski, Wojciech ;
Lesniak, Dariusz .
CRYSTALS, 2024, 14 (12)
[23]   Effect of thermo-mechanical treatment on properties improvement and microstructure changes in copper-gold alloy [J].
Markovic, Ivana ;
Nestorovic, Svetlana ;
Markovic, Desimir .
MATERIALS & DESIGN, 2014, 53 :137-144
[24]   Influences of thermo-mechanical treatment process on the microstructure evolution and tensile properties of 7075 Al alloy [J].
Jin, J. W. ;
Zhang, Z. J. ;
Hou, J. P. ;
Gong, B. S. ;
Wang, H. W. ;
Zhou, X. H. ;
Purcek, G. ;
Sheinerman, A. G. ;
Zhang, Z. F. .
MATERIALS TODAY COMMUNICATIONS, 2025, 43
[25]   Effect of Cold Plastic Deformation on Mechanical Properties of Aluminum Alloy 2519 After Ageing [J].
Zuiko, Ivan ;
Gazizov, Marat ;
Kaibyshev, Rustam .
Aluminium Alloys 2014 - ICAA14, 2014, 794-796 :888-893
[26]   Enhanced mechanical properties of Sr-modified Al-Mg-Si alloy by thermo-mechanical treatment [J].
Karakoca, Alper ;
Yilmaz, Serdar Osman .
MATERIALS TESTING, 2025, 67 (01) :136-146
[27]   Influences of Ce addition on the microstructures and mechanical properties of 2519A aluminum alloy plate [J].
Wang, Wen-tao ;
Zhang, Xin-ming ;
Gao, Zhi-guo ;
Jia, Yu-zhen ;
Ye, Ling-ying ;
Zheng, Da-wei ;
Liu, Ling .
JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 491 (1-2) :366-371
[28]   Influence of thermo-mechanical processing on microstructure, mechanical properties and corrosion behavior of a new metastable β-titanium biomedical alloy [J].
Mohammed, Mohsin Talib ;
Khan, Zahid A. ;
Geetha, M. ;
Siddiquee, Arshad N. ;
Mishra, Prabhash .
BULLETIN OF MATERIALS SCIENCE, 2015, 38 (01) :247-258
[29]   Effect of thermo-mechanical treatment and strontium addition on workability and mechanical properties of Al-Si-Cu casting alloy [J].
Lee, Yun-Soo ;
Jung, Je-Ki ;
Kim, Soo-Bae ;
Kim, Su-Hyeon ;
Lim, Cha-Yong ;
Kim, Hyoung-Wook ;
Kim, Won-Kyoung ;
Hyun, Soong-Keun .
MATERIALS CHARACTERIZATION, 2021, 178
[30]   Effect of thermo-mechanical treatment process on microstructure and mechanical properties of 2A97 Al-Li alloy [J].
Gao, Chong ;
Luan, Yang ;
Yu, Jun-chuan ;
Ma, Yue .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (07) :2196-2202
12345