A dynamic model of cylindrical plunge grinding process for chatter phenomena investigation

被引：7

作者：

Lajmert, Pawel ^{[1
]}

Sikora, Malgorzata ^{[1
]}

Ostrowski, Dariusz ^{[1
]}

机构：

[1] Lodz Univ Technol, Inst Machine Tools & Prod Engn, Lodz, Poland

来源：

INTERNATIONAL CONFERENCE ON ENGINEERING VIBRATION (ICOEV 2017) | 2018年 / 148卷

关键词：

STABILITY; SYSTEM;

D O I：

10.1051/matecconf/201814809004

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

In the paper, chatter vibrations in the cylindrical plunge grinding process are investigated. An improved model of the grinding process was developed which is able to simulate self-excited vibrations due to a regenerative effect on the workpiece and the grinding wheel surface. The model includes a finite-element model of the workpiece, two degrees of freedom model of the grinding wheel headstock and a model of wheel-workpiece geometrical interferences. The model allows to studying the influence of different factors, i.e. workpiece and machine parameters as well as grinding conditions on the stability limit and a chatter vibration growth rate. At the end, simulation results are shown and compared with exemplified real grinding results.

引用

页数：4

共 50 条

[21] Model predictive control based active chatter control in milling process [J].

Li, Denghui ;

Cao, Hongrui ;

Zhang, Xingwu ;

Chen, Xuefeng ;

Yan, Ruqiang .

MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2019, 128 :266-281

[22] System Identification and Model Predictive Control of the Chatter Phenomenon in Turning Process [J].

Karimipour, Atiyeh ;

Emami, Mohsen .

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2019, 13 (03) :217-228

[23] A novel chatter stability criterion for the modelling and simulation of the dynamic milling process in the time domain [J].

Li, HZ ;

Li, XP ;

Chen, XQ .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2003, 22 (9-10) :619-625

[24] A novel chatter stability criterion for the modelling and simulation of the dynamic milling process in the time domain [J].

H. Z. Li ;

X. P. Li ;

X. Q. Chen .

The International Journal of Advanced Manufacturing Technology, 2003, 22 :619-625

[25] Experimental investigation into the effect of magnetorheological fluid damper on vibration and chatter in straight turning process [J].

Emami, Mohsen ;

Nasab, Vahid Hasan ;

Akar, Samet ;

Batako, Andre .

JOURNAL OF MANUFACTURING PROCESSES, 2023, 99 :825-847

[26] Nonlinear Model for the Instability Detection in Centerless Grinding Process [J].

Billerman Robles-Ocampo, Jose ;

Carlos Jauregui-Correa, Juan ;

Krajnik, Peter ;

Yasmin Sevilla-Camacho, Perla ;

Herrera-Ruiz, Gilberto .

STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2012, 58 (12) :693-700

[27] Machinability investigation in cylindrical lapping of AISI 52100 bearing roller based on DDSG grinding method [J].

Deng, Xiaofan ;

Cai, Zhijie ;

Zou, Yunhe ;

Wang, Zhiqiang ;

Wu, Xiaoqiang ;

Zhang, Lifeng ;

Hu, Gaofeng ;

Zhu, Zheming .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 127 (11-12) :5265-5277

[28] Process monitoring in precision cylindrical traverse grinding of slender bar using acoustic emission technology [J].

Wang, Jianjian ;

Feng, Pingfa ;

Zha, Tijian .

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2017, 31 (02) :859-864

[29] An Analytical Dynamic Model of a Hollow Cylindrical Roller Bearing [J].

Liu, Jing ;

Shao, Yimin .

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2018, 140 (06)

[30] Experimental Investigation and Improvement of Dynamic Performance of High-speed Grinding Machine [J].

Shen, Xiaolong ;

Ren, Chenggao ;

Pi, Zhimou ;

Zhu, Daili .

ADVANCED MANUFACTURING TECHNOLOGY, PTS 1, 2, 2011, 156-157 :1609-1612

← 1 2 3 4 5 →