Analysis and design optimization of a frontal combine harvester axle using finite element and experimental methods

被引：0
作者：
Khanali, Majid [1 ]
Jafari, Ali [1 ]
Mobli, Hossein [1 ]
Rajabipour, Ali [1 ]
机构：
[1] Univ Tehran, Univ Coll Agr & Nat Resources, Dept Agr Machinery Engn, Fac Agr Engn & Technol, Karaj 3158777871, Iran
来源：
JOURNAL OF FOOD AGRICULTURE & ENVIRONMENT | 2010年 / 8卷 / 02期
关键词：
Front axle; stress analysis; optimization; combine harvester; finite element method;
D O I：
暂无
中图分类号：
TS2 [食品工业];
学科分类号：
0832 ;
摘要：
JD 955 combine manufactured by Iran Combine Harvester Manufacturing Company was modified. Total weight and the loads applied on front axle of modified combine were increased. The commercial finite element package ANSYS V9.0 was used for the solution of the problem. Based on finite element analysis, redesign of front axle was carried out for increasing mechanical strength, easy manufacturability and cost reduction. Results of static, modal and transient analysis of proposed front axle under loading due to modified combine showed that the proposed model is suitable to install on the modified combine. Results obtained by numerical method were verified experimentally. The strain measurement was carried out using strain gauges. The calculated values of strain by numerical method were in good agreement with experimental data.
引用
收藏
页码：359 / 364
页数：6
相关论文
共 50 条
[31]   Study and Design of Corrugated Cardboard Trays With Microwaves by Experimental Analysis (EA) and Finite Element Methods (FEM) [J].
Di Russo, Franco Maria ;
Desole, Maria Pia ;
Gisario, Annamaria ;
Genovesi, Annalisa ;
Barletta, Massimiliano .
PACKAGING TECHNOLOGY AND SCIENCE, 2024, 37 (09) :857-874
[32]   Finite element analysis of car frame frontal crash using lightweight materials [J].
Idrees, Usama ;
Ahmad, Sajjad ;
Shah, Imtiaz Alam ;
Talha, Muhammad ;
Shehzad, Rehman ;
Amjad, Muhammad ;
Koloor, Seyed Saeid Rahiamin .
JOURNAL OF ENGINEERING RESEARCH, 2023, 11 (01)
[33]   Design optimization of a nonlinear magnetic media system using finite element analysis and Taguchi method [J].
Chen, SX ;
Low, TS ;
Leow, PB .
COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2002, 21 (02) :223-234
[34]   Design Sensitivity Analysis for Identification the Optimum Shape and Geometry Optimization by Using Finite Element Method [J].
Magid, Hani Mizhir ;
Kamoon, Badr ;
Obaid, Zuhair H. .
JOURNAL OF MECHANICS OF CONTINUA AND MATHEMATICAL SCIENCES, 2019, :315-325
[35]   DESIGN AND EXPERIMENTAL STUDY OF A SPIRAL AUXILIARY FEEDING DEVICE FOR LODGED CORN ON A COMBINE HARVESTER [J].
Fu, Qiankun ;
Fu, Jun ;
Chen, Zhi ;
Zhao, Rongqiang ;
Ren, Luquan .
JOURNAL OF THE ASABE, 2022, 65 (01) :31-38
[36]   Experimental and finite element optimization analysis on hydroforming process of rupture disc [J].
Kong, Xiangwei ;
Zhang, Jiancong ;
Li, Xuqing ;
Jin, Zhibo ;
Zhong, Hai ;
Zhan, Yu ;
Han, Fengjuan .
PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018, 2018, 15 :892-898
[37]   Design and performance analysis of a new optimization algorithm based on Finite Element Analysis [J].
Ning, Zhiqiang ;
Gao, Youshan ;
Wang, Aihong .
SCIENCE PROGRESS, 2020, 103 (03)
[38]   Design and Evaluation of a Piezoelectric Energy Harvester Produced with a Finite Element Method [J].
Kim, Chul Min ;
Kim, Chang-Il ;
Lee, Joo-Hee ;
Paik, Jong-Hoo ;
Cho, Jeong-Ho ;
Chun, Myoung-Pyo ;
Jeong, Young-Hun ;
Lee, Young-Jin .
TRANSACTIONS ON ELECTRICAL AND ELECTRONIC MATERIALS, 2010, 11 (05) :206-211
[39]   Simulation of a piezoelectric energy harvester using finite element method [J].
Rejdali, Hajar ;
Salhi, Imane ;
Jay, Jacques ;
Hajjaji, Abdelowahed ;
Belhora, Fouad .
MATERIALS TODAY-PROCEEDINGS, 2022, 66 :125-129
[40]   SHAPE OPTIMIZATION DESIGN OF CRUSH TOOTH USING FINITE ELEMENT METHOD [J].
Gong Kaijun ;
Yang Qingfu ;
Zhang Junxia (Taiyuan University of Technology) Zhu Wennong (Jilin University of Technology) .
Chinese Journal of Mechanical Engineering(English Edition), 1994, (02) :130-134
12345