Analysis and design optimization of a frontal combine harvester axle using finite element and experimental methods

被引：0

作者：

Khanali, Majid ^{[1
]}

Jafari, Ali ^{[1
]}

Mobli, Hossein ^{[1
]}

Rajabipour, Ali ^{[1
]}

机构：

[1] Univ Tehran, Univ Coll Agr & Nat Resources, Dept Agr Machinery Engn, Fac Agr Engn & Technol, Karaj 3158777871, Iran

来源：

JOURNAL OF FOOD AGRICULTURE & ENVIRONMENT | 2010年 / 8卷 / 02期

关键词：

Front axle; stress analysis; optimization; combine harvester; finite element method;

D O I：

暂无

中图分类号：

TS2 [食品工业];

学科分类号：

0832 ;

摘要：

JD 955 combine manufactured by Iran Combine Harvester Manufacturing Company was modified. Total weight and the loads applied on front axle of modified combine were increased. The commercial finite element package ANSYS V9.0 was used for the solution of the problem. Based on finite element analysis, redesign of front axle was carried out for increasing mechanical strength, easy manufacturability and cost reduction. Results of static, modal and transient analysis of proposed front axle under loading due to modified combine showed that the proposed model is suitable to install on the modified combine. Results obtained by numerical method were verified experimentally. The strain measurement was carried out using strain gauges. The calculated values of strain by numerical method were in good agreement with experimental data.

引用

页码：359 / 364

页数：6

共 50 条

[11] Design Optimization of a Xenogeneic Bone Plate and Screws Using the Taguchi and Finite Element Methods [J].

Kim, Jong-Dae ;

Kim, Nam-Soo ;

Hong, Chang-Seob ;

Oh, Chae-Youn .

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2011, 12 (06) :1119-1124

[12] Design optimization of a xenogeneic bone plate and screws using the Taguchi and finite element methods [J].

Jong-Dae Kim ;

Nam-Soo Kim ;

Chang-Seob Hong ;

Chae-Youn Oh .

International Journal of Precision Engineering and Manufacturing, 2011, 12 :1119-1124

[13] Optimization with experimental design: An approach using Taguchi's methodology and finite element simulations [J].

Brisset, S ;

Gillon, F ;

Vivier, S ;

Brochet, P .

IEEE TRANSACTIONS ON MAGNETICS, 2001, 37 (05) :3530-3533

[14] Design and optimization of segmented threshing device of combine harvester for rice and wheat [J].

Teng Y. ;

Jin C. ;

Chen Y. ;

Liu P. ;

Yin X. ;

Wang T. ;

Yu K. .

Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2020, 36 (12) :1-12

[15] Finite-Element Analysis on Lightweight Material of Drive Axle Housing [J].

Zhao, Feifei .

REVUE DES COMPOSITES ET DES MATERIAUX AVANCES-JOURNAL OF COMPOSITE AND ADVANCED MATERIALS, 2021, 31 (01) :41-49

[16] Design and Optimization of Four Wheeler Connecting Rod Using Finite Element Analysis [J].

Gopinath, D. ;

Sushma, Ch V. .

MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) :2291-2299

[17] Design and Optimization of Soft Magnetic Composite Machines With Finite Element Methods [J].

Cros, Jerome ;

Viarouge, Philippe ;

Kakhki, Mehdi Taghizadeh .

IEEE TRANSACTIONS ON MAGNETICS, 2011, 47 (10) :4384-4390

[18] Design, Analysis, and Optimization of Chassis Frame Rail Profile Using Design Exploration and Finite Element Analysis Technique [J].

Avinash, J. .

SAE INTERNATIONAL JOURNAL OF COMMERCIAL VEHICLES, 2024, 17 (02)

[19] Elaboration of Design and Optimization Methods for a Newly Developed CFRP Sandwich-like Structure Validated by Experimental Measurements and Finite Element Analysis [J].

Kovacs, Gyorgy .

POLYMERS, 2021, 13 (24)

[20] Structural design optimization of pressure hull using genetic algorithm and finite element analysis [J].

Romero-Tello, Pablo ;

Lorente-Lopez, Antonio Jose ;

Gutierrez-Romero, Jose Enrique .

INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY, 2025, 16 (01) :60-84

← 1 2 3 4 5 →