Effect of welding speed on mechanical properties and corrosion resistance rates of filler induced friction stir welded AA6082 and AA5052 joints

被引：28
|
作者：
Sasikumar, A. [1 ]
Gopi, S. [1 ]
Mohan, Dhanesh [2 ]
机构：
[1] Govt Coll Technol, Dept Prod Engn, Coimbatore, Tamil Nadu, India
[2] Shandong Univ, Inst Mat Joining, Jinan, Peoples R China
来源：
MATERIALS RESEARCH EXPRESS | 2021年 / 8卷 / 06期
关键词：
friction stir welding; aluminium alloys; filler; microstructure; corrosion; BEHAVIOR;
D O I：
10.1088/2053-1591/ac0c9e
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Friction Stir Welding (FSW) was carried out to examine the influence of filler materials and varying process parameters on the microhardness and the joints corrosion resistance properties. Aluminium alloys 6082 and 5052, having 8 mm thickness was joined by varying parameters. The primary process parameters are rotational speed, tool travel speed, plunge depth, filler holes centre distance and filler ratio. The hardness at the weld nugget zone and corrosion rate evaluations were analyzed. The best results were obtained for the parameter combinations of 1150 rpm tool rotation, 130 mm min(-1) tool travel, 0.2 mm tool plunge, the filler holes centre distance 2 mm and a powder filler made of 95% magnesium and 5% chromium.
引用
收藏
页数：12
相关论文
共 50 条
  • [21] Assessment of friction stir spot welding of AA5052 joints via machine learning
    Mohammed Asmael
    Omer Kalaf
    Babak Safaei
    Tauqir Nasir
    Saeid Sahmani
    Qasim Zeeshan
    Acta Mechanica, 2024, 235 : 1945 - 1960
  • [22] Investigations on the Effect of Cyclic Heat Treatment on the Mechanical Properties of Friction Stir Welded Aluminum Alloys (AA5052 & AA6061)
    Srikanth, Chikkam
    Vignesh, R. Vaira
    Padmanaban, R.
    RUSSIAN JOURNAL OF NON-FERROUS METALS, 2021, 62 (06) : 692 - 707
  • [23] Investigations on the Effect of Cyclic Heat Treatment on the Mechanical Properties of Friction Stir Welded Aluminum Alloys (AA5052 & AA6061)
    Chikkam Srikanth
    R. Vaira Vignesh
    R. Padmanaban
    Russian Journal of Non-Ferrous Metals, 2021, 62 : 692 - 707
  • [24] Effect of welding parameters on mechanical and microstructural properties of dissimilar AA6082-AA2024 joints produced by Friction Stir Welding
    Cavaliere, P.
    Squillace, A.
    ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 1163 - 1168
  • [25] Effect of welding parameters on mechanical and microstructural properties of dissimilar AA6082-AA2024 joints produced by friction stir welding
    Cavaliere, P.
    De Santis, A.
    Panella, F.
    Squillace, A.
    MATERIALS & DESIGN, 2009, 30 (03) : 609 - 616
  • [26] EFFECT OF TOOL GEOMETRY AND WELDING SPEED ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF FRICTION STIR WELDED JOINTS OF ALUMINIUM ALLOYS AA6082-T-6
    Patil, Hiralal Subhash
    Soman, Sanjay N.
    ARCHIVE OF MECHANICAL ENGINEERING, 2014, 61 (03) : 455 - 468
  • [27] Microstructural and Mechanical Behaviors of Friction Stir Welded Dissimilar AA6082-AA7075 Joints
    Sezhian, M. Vetrivel
    Giridharan, K.
    Pushpanathan, D. Peter
    Chakravarthi, G.
    Stalin, B.
    Karthick, Alagar
    Kumar, P. Manoj
    Bharani, Murugesan
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021
  • [28] The influence of materials positioning on microstructure and mechanical properties of friction stir welded AA5083/AA6082 dissimilar joint
    Msomi, Velaphi
    Moni, Vuyani
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 (02) : 2087 - 2101
  • [29] Microstructural and Mechanical Behaviors of Friction Stir Welded Dissimilar AA6082-AA7075 Joints
    Vetrivel Sezhian, M.
    Giridharan, K.
    Peter Pushpanathan, D.
    Chakravarthi, G.
    Stalin, B.
    Karthick, Alagar
    Manoj Kumar, P.
    Bharani, Murugesan
    Advances in Materials Science and Engineering, 2021, 2021
  • [30] Optimization of Friction Stir Welding Parameters to Maximize Hardness of AA6082/Si3N4 and AA6082/SiC Composites Joints
    Bhushan, Rajesh Kumar
    Sharma, Deepak
    SILICON, 2022, 14 (02) : 643 - 661
12345