Transverse Compression Response of Ultra-High Molecular Weight Polyethylene Single Fibers

被引:3
作者
Sockalingam, Subramani [1 ]
Gillespie, John W., Jr. [1 ,2 ,3 ,4 ]
Keefe, Michael [1 ,2 ]
Casem, Dan [5 ]
Weerasooriya, Tusit [5 ]
机构
[1] Univ Delaware, Ctr Composite Mat, Newark, DE 19716 USA
[2] Univ Delaware, Dept Mech Engn, Newark, DE 19716 USA
[3] Univ Delaware, Dept Mat Sci & Engn, Newark, DE USA
[4] Univ Delaware, Dept Civil & Environm Engn, Newark, DE USA
[5] Army Res Lab, Aberdeen, MD USA
来源
DYNAMIC BEHAVIOR OF MATERIALS, VOL 1 | 2017年
关键词
UHMWPE; Ballistic impact; Transverse compression; Finite element analysis (FEA); Constitutive model; IMPACT;
D O I
10.1007/978-3-319-41132-3_2
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This work reports on the experimental quasi static transverse compression response of ultra-high molecular weight polyethylene (UHMWPE) Dyneema SK76 single fibers. The experimental nominal stress-strain response of single fibers exhibits nonlinear inelastic behavior under transverse compression with negligible strain recovery during unloading. Scanning electron microscopy (SEM) reveals the presence of significant voids along the length of the virgin and compressed fibers. The inelastic behavior is attributed to the microstructural damage within the fiber. The compressed fiber cross sectional area is found to increase to a maximum of 1.83 times the original area at 46 % applied nominal strains. The true stress strain behavior is determined by removing the geometric nonlinearity due to the growing contact area. The transverse compression experiments serve as validation experiments for fibril-length scale models.
引用
收藏
页码:7 / 13
页数:7
相关论文
共 7 条
  • [1] Cunniff P.M., 1999, P 18 INT S BALLISTIC, P1303
  • [2] TRANSVERSE COMPRESSION OF ANISOTROPIC FIBRE MONOFILAMENTS
    HADLEY, DW
    WARD, IM
    WARD, J
    [J]. PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1965, 285 (1401): : 275 - &
  • [3] TRANSVERSE COMPRESSION OF ORIENTED NYLON AND POLYETHYLENE EXTRUDATES
    JAWAD, SA
    WARD, IM
    [J]. JOURNAL OF MATERIALS SCIENCE, 1978, 13 (07) : 1381 - 1387
  • [4] Numerical simulation of ceramic composite armor subjected to ballistic impact
    Krishnan, K.
    Sockalingam, S.
    Bansal, S.
    Rajan, S. D.
    [J]. COMPOSITES PART B-ENGINEERING, 2010, 41 (08) : 583 - 593
  • [5] Structural hierarchy and surface morphology of highly drawn ultra high molecular weight polyethylene fibers studied by atomic force microscopy and wide angle X-ray diffraction
    McDaniel, Preston B.
    Deitzel, Joseph M.
    Gillespie, John W., Jr.
    [J]. POLYMER, 2015, 69 : 148 - 158
  • [6] Transverse compression behavior of Kevlar KM2 single fiber
    Sockalingam, Subramani
    Bremble, Reid
    Gillespie, John W., Jr.
    Keefe, Michael
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2016, 81 : 271 - 281
  • [7] Dynamic modeling of Kevlar KM2 single fiber subjected to transverse impact
    Sockalingam, Subramani
    Gillespie, John W., Jr.
    Keefe, Michael
    [J]. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2015, 67-68 : 297 - 310