共 47 条
Nickel-based bilayer thin-film anodes for low-temperature solid oxide fuel cells
被引:17
作者:
Lee, Yeageun
[1
]
Park, Joonho
[1
]
Yu, Wonjong
[1
]
Tanveer, Waqas Hassan
[1
,2
]
Lee, Yoon Ho
[1
]
Cho, Gu Young
[1
]
Park, Taehyun
[1
,3
]
Zheng, Chunhua
[4
]
Lee, Wonyoung
[5
]
Cha, Suk Won
[1
,6
]
机构:
[1] Seoul Natl Univ, Dept Mech & Aerosp Engn, Gwanak Ro 1, Seoul 08826, South Korea
[2] Natl Univ Sci & Technol, Sch Mech & Mfg Engn, Dept Mech Engn, H-12, Islamabad 44000, Pakistan
[3] Soongsil Univ, Dept Mech Engn, Sangdo Ro 369, Seoul 06978, South Korea
[4] Chinese Acad Sci, Shenzhen Inst Adv Technol, 1068 Xueyuan Ave, Shenzhen 518055, Peoples R China
[5] Sungkyunkwan Univ, Sch Mech Engn, Seobu Ro 2066, Suwon 16419, South Korea
[6] Inst Adv Machines & Design, Gwanak Ro 1, Seoul 08826, South Korea
来源:
基金:
新加坡国家研究基金会;
关键词:
Ni-YSZ;
Bilayer anode;
Thin film;
Solid oxide fuel cell;
ATOMIC LAYER DEPOSITION;
PULSED-LASER DEPOSITION;
IMPEDANCE SPECTROSCOPY;
PERFORMANCE;
SOFC;
ELECTROLYTE;
MICROSTRUCTURE;
CERMETS;
CATHODE;
METALS;
D O I:
10.1016/j.energy.2018.07.147
中图分类号:
O414.1 [热力学];
学科分类号:
摘要:
In this study, we investigate the possibility of using Ni-based anodes as alternatives to the Pt-based anodes for thin-film solid oxide fuel cells (SOFCs) operating at low temperatures. Anodes, electrolytes, and cathodes are sequentially sputtered onto a nanoporous substrate. The pure Ni anodes with modified nanostructures exhibit comparable performance as that of the optimized Pt anodes. Furthermore, a NilNi-YSZ bilayer anode fabricated via a co-sputtering method exhibits approximately 37% higher peak power density than does the optimized Pt anode at 500 degrees C, demonstrating that noble metal anodes can be replaced by Ni-based anodes in low-temperature SOFCs by optimizing the anode nanostructure. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1133 / 1138
页数:6
相关论文