Wear resistance of Zr-based bulk metallic glass applied in bearing rollers

被引：126

作者：

Ma, MZ ^{[1
]}

Liu, RP ^{[1
]}

Xiao, Y ^{[1
]}

Lou, DC ^{[1
]}

Liu, L ^{[1
]}

Wang, Q ^{[1
]}

Wang, WK ^{[1
]}

机构：

[1] Yanshan Univ, Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2004年 / 386卷 / 1-2期

基金：

中国国家自然科学基金;

关键词：

bulk metallic glass; wear resistance; bearing roller;

D O I：

10.1016/j.msea.2004.07.054

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Bearing rollers, 7.5 mm in diameter and 7.5 mm in length, were prepared from Zr41Ti14Cu12.5Ni10Be22.5 bulk metallic glass (BMG). The working life of the bearing rollers was evaluated through a real rotation test with a large-load and at a high-speed, and compared with that of commercial GCr15 steel rollers. The results show that the bearing rollers of Zr-based bulk metallic glass have a better wear resistance than the commercial GCr15 ones. And the wear behaviours are different for these two kinds of bearing rollers. (C) 2004 Elsevier B.V All rights reserved.

引用

页码：326 / 330

页数：5

共 24 条

[1] Big cube phase formation in Zr-based metallic glasses
Baricco, M
Spriano, S
Chang, I
Petrzhik, MI
Battezzati, L
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 304 : 305 - 310
[2] Viscosity of the supercooled liquid and relaxation at the glass transition of the Zr46.75Ti8.25Cu7.5Ni10Be27.5 bulk metallic glass forming alloy
Busch, R
Bakke, E
Johnson, WL
[J]. ACTA MATERIALIA, 1998, 46 (13) : 4725 - 4732
[3] THERMODYNAMICS AND KINETICS OF THE UNDERCOOLED LIQUID AND THE GLASS-TRANSITION OF THE ZR41.2TI13.8CU12.5NI10.0BE22.5 ALLOY
BUSCH, R
KIM, YJ
JOHNSON, WL
[J]. JOURNAL OF APPLIED PHYSICS, 1995, 77 (08) : 4039 - 4043
[4] Fracture toughness determination for a beryllium-bearing bulk metallic glass
Conner, RD
Rosakis, AJ
Johnson, WL
Owen, DM
[J]. SCRIPTA MATERIALIA, 1997, 37 (09) : 1373 - 1378
[5] Sliding and deformation of metallic glass: experiments and MD simulations
Fu, XY
Rigney, DA
Falk, ML
[J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 2003, 317 (1-2) : 206 - 214
[6] Low-temperature acoustic characteristics of the amorphous alloy Zr41.2Ti13.8Cu12.5Ni10Be22.5
Gaiduk, AL
Bezuglyi, EV
Fil, VD
Johnson, WL
[J]. LOW TEMPERATURE PHYSICS, 1997, 23 (10) : 857 - 860
[7] Fracture toughness and fatigue-crack propagation in a Zr-Ti-Ni-Cu-Be bulk metallic glass
Gilbert, CJ
Ritchie, RO
Johnson, WL
[J]. APPLIED PHYSICS LETTERS, 1997, 71 (04) : 476 - 478
[8] Microhardness and abrasive wear resistance of metallic glasses and nanostructured composite materials
Gloriant, T
[J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 2003, 316 (01) : 96 - 103
[9] Deformation behavior of Zr-based metallic glasses
Heilmaier, M
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 117 (03) : 374 - 380
[10] Bulk amorphous and nanocrystalline alloys with high functional properties
Inoue, A
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 304 (304-306): : 1 - 10

← 1 2 3 →