Analyzing the performance of combined solar photovoltaic power system with phase change material

被引:10
作者
Divya, S. [1 ]
Mathiyalagan, Siva Ramkumar [2 ]
Mohana, J. [3 ]
Dattu, Vinjamuri S. N. Ch [4 ]
Hemavathi, S. [5 ,6 ]
Natrayan, L. [7 ]
Chakaravarthi, Anand M. C. [8 ]
Mohanavel, V [9 ,11 ]
Sathyamurthy, Ravishankar [10 ,11 ]
机构
[1] GSSS Inst Engn & Technol Women, Dept Elect & Elect Engn, Mysore 570016, Karnataka, India
[2] Karpagam Acad Higher Educ, Dept Elect & Elect Engn, Coimbatore 641021, Tamil Nadu, India
[3] Saveetha Sch Engn, Saveetha Inst Med & Tech Sci, Dept Elect & Commun Engn, Chennai 602105, Tamil Nadu, India
[4] JNTUK, Aditya Engn Coll A, Dept Mech Engn, Surampalem 533437, Andhra Pradesh, India
[5] Cent Electrochem Res Inst, Battery Div, Chennai 600113, Tamil Nadu, India
[6] Acad Sci & Innovat Res, Ghaziabad 201002, Uttar Pradesh, India
[7] SIMATS, Dept Mech Engn, Saveetha Sch Engn, Chennai 600124, Tamil Nadu, India
[8] Sri Sai Ram Engn Coll, Dept Mech Engn, Chennai 600044, Tamil Nadu, India
[9] Bharath Inst Higher Educ & Res, Ctr Mat Engn & Regenerat Med, Chennai 600073, Tamil Nadu, India
[10] KPR Inst Engn & Technol, Dept Mech Engn, Arasur 641407, Tamil Nadu, India
[11] Chandigarh Univ, Univ Ctr Res & Dev, Dept Mech Engn, Mohali, Punjab, India
关键词
Photovoltaic system; Phase change material (PCM); Thermal system; Solar photovoltaic power system; ENERGY;
D O I
10.1016/j.egyr.2022.06.109
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Under the influence of cosmic improvement, photovoltaic (PV) container power capability decreases. In this case study, several passive and active chilling exploratory studies are carried out on a PV container to determine their effects on the energetic and warm depiction of a PVT scheme. All experiments are carried out on a cosmic person who poses as an expert while working with a wide range (regular-condensed) of energy from the sun's capability. The temperature of the PV container rises as heat is generated along its course, resulting in a lower power delivered. The heat produced during the operation can be eliminated by attaching phase change material (PCM) to the PV committee afterward, which can retain the PV heat for a long time to increase overall effectiveness. Fins may be secondhand inside the PCM canister to improve the heat transmission. In research, it is noticed that as directly as PCM is melted entirely, the heat ancestry rate of PCM reduces that repeated leads to development in PV hotness. An oily acid was preferred as the PCM with a development change hotness. For the time being the investigation, research inspected two various sporadic warm requirement approaches utilizing a water distribution loop in the PV/T-PCM arrangement to boost the overall solar energy exercise effectiveness, and particularized contrasting were accomplished. The results showed that using PCM in a solar-powered battery can essentially reduce the PV committee's hotness vacillation and improve photoelectric efficacy. Using the warm regulation method's low hotness backdrop, excess heat may be extracted from the PCM in the solar panel. It was decided that an acceptable thermal management policy might improve the overall energy exercise percentage of the PV/T-PCM plan; however, more effect on the commerce research of the system that regulates organization is still needed. The research is developed to analyze a combination of solar Photovoltaic power systems using the PCM performance is analyzed. (c) 2022 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
引用
收藏
页码:43 / 56
页数:14
相关论文
共 25 条
[1]   Experimental investigations on the thermal performance of an ice storage system using twin concentric helical coil [J].
Abdelrahman, H. E. ;
Refaey, H. A. ;
Alotaibi, A. ;
Abdel-Aziz, Ali A. ;
Abd Rabbo, M. F. .
APPLIED THERMAL ENGINEERING, 2020, 179
[2]   Performance comparison of the thermal behavior of xylitol and erythritol in a double spiral coil latent heat storage system [J].
Anish, R. ;
Mariappan, V ;
Joybari, Mahmood Mastani ;
Abdulateef, Ammar M. .
THERMAL SCIENCE AND ENGINEERING PROGRESS, 2020, 15
[3]   Analysis of a Hybrid PV/Thermal Solar-Assisted Heat Pump System for Sports Center Water Heating Application [J].
Bai, Y. ;
Chow, T. T. ;
Menezo, C. ;
Dupeyrat, P. .
INTERNATIONAL JOURNAL OF PHOTOENERGY, 2012, 2012
[4]   Modelling and Assessing the Performance of Hybrid PV-CSP Plants in Morocco: A Parametric Study [J].
Bousselamti, Loubna ;
Cherkaoui, Mohamed .
INTERNATIONAL JOURNAL OF PHOTOENERGY, 2019, 2019
[5]   Experimental analysis of a low cost phase change material emulsion for its use as thermal storage system [J].
Delgado, Monica ;
Lazaro, Ana ;
Mazo, Javier ;
Penalosa, Conchita ;
Dolado, Pablo ;
Zalba, Belen .
ENERGY CONVERSION AND MANAGEMENT, 2015, 106 :201-212
[6]   Solar-driven melting dynamics in a shell and tube thermal energy store: An experimental analysis [J].
Egea, A. ;
Solano, J. P. ;
Perez-Garcia, J. ;
Garcia, A. .
RENEWABLE ENERGY, 2020, 154 :1044-1052
[7]   Effect of air bubble injection on the thermal performance of a flat plate solar collector [J].
Khwayyir, Hasan S. ;
Baqir, Ali Sh ;
Mohammed, Hiba Q. .
THERMAL SCIENCE AND ENGINEERING PROGRESS, 2020, 17
[8]   Experimental and numerical research on thermal performance of a novel thermal energy storage unit with phase change material [J].
Lin, Wenzhu ;
Ling, Ziye ;
Fang, Xiaoming ;
Zhang, Zhengguo .
APPLIED THERMAL ENGINEERING, 2021, 186
[9]   Experimental study on the melting behavior of a phase change material in a conical coil latent heat thermal energy storage unit [J].
Mahdi, Mustafa S. ;
Mahood, Hameed B. ;
Campbell, Alasdair N. ;
Khadom, Anees A. .
APPLIED THERMAL ENGINEERING, 2020, 175
[10]   Improved PCM melting in a thermal energy storage system of double-pipe helical-coil tube [J].
Mahdi, Mustafa S. ;
Mahood, Hameed B. ;
Mahdi, Jasim M. ;
Khadom, Anees A. ;
Campbell, Alasdair N. .
ENERGY CONVERSION AND MANAGEMENT, 2020, 203