The effects of AlCrN coating, surface modification and their combination on the tribological properties of high speed steel under dry conditions

被引：45
作者：
Cho, In-Sik [1 ]
Amanov, Auezhan [2 ,3 ]
Kim, Jong-Deok [4 ]
机构：
[1] Sun Moon Univ, Dept Hybrid Engn, Asan 336708, South Korea
[2] Tokyo Univ Sci, Dept Mech Engn, Tokyo 1258585, Japan
[3] Sun Moon Univ, Dept Mech Engn, Asan 336708, South Korea
[4] Korea Inst Ind Technol, Molds & Dies Technol R&D Grp, Inchon 406840, South Korea
来源：
TRIBOLOGY INTERNATIONAL | 2015年 / 81卷
关键词：
High speed steel; AlCrN coating; Surface modification; Tribology; STAINLESS-STEEL; WEAR; BEHAVIOR; ALLOY; TOOL; TITANIUM; BLANKING; PERFORMANCE; RESISTANCE; TI-6AL-4V;
D O I：
10.1016/j.triboint.2014.08.003
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this study, the effects of a combination of ultrasonic nanocrystalline surface modification (UNSM) technique and AlCrN coating on the tribological properties of high speed steel (HSS) were investigated. The AlCrN coating with a thickness of about 3 gm was deposited by the physical vapor deposition (PVD) technique onto the polished and UNSM-treated HSS specimens. The tribological and scratch tests results revealed that the AlCrN coating deposited onto the UNSM-treated specimen showed better tribological properties compared to that of the AlCrN coating deposited onto the polished specimen, which may be attributed to the modified surface beneath the AlCrN coating. Hence, it is expected that the results of this study can be applied to reduce the wear of fine blanking punches. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：61 / 72
页数：12
相关论文
共 33 条
[1]   Micro-dimpled surface by ultrasonic nanocrystal surface modification and its tribological effects [J].
Amanov, A. ;
Cho, I. S. ;
Pyoun, Y. S. ;
Lee, C. S. ;
Park, I. G. .
WEAR, 2012, 286 :136-144
[2]   Frictional behavior of duplex nano-corrugated and nanostructured Cu alloy produced by UNSM [J].
Amanov, Auezhan ;
Sasaki, Shinya ;
Young-SikPyun .
INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013, 2013, 68 :491-496
[3]   Effects of ultrasonic nanocrystalline surface modification (UNSM) technique on the tribological behavior of sintered Cu-based alloy [J].
Amanov, Auezhan ;
Pyun, Young-Sik ;
Sasaki, Shinya .
TRIBOLOGY INTERNATIONAL, 2014, 72 :187-197
[4]   The influence of DLC coating on the mechanical and frictional properties of unpeened and peened Cu-based bimetal under dry sliding conditions [J].
Amanov, Auezhan ;
Cho, In-Sik ;
Sasaki, Shinya .
MATERIALS CHEMISTRY AND PHYSICS, 2014, 143 (02) :814-824
[5]   Effectiveness of high-frequency ultrasonic peening treatment on the tribological characteristics of Cu-based sintered materials on steel substrate [J].
Amanov, Auezhan ;
Cho, In-Sik ;
Kim, Dae-Eun .
MATERIALS & DESIGN, 2013, 45 :118-124
[6]   Fretting wear and friction reduction of CP titanium and Ti-6Al-4V alloy by ultrasonic nanocrystalline surface modification [J].
Amanov, Auezhan ;
Cho, In-Sik ;
Kim, Dae-Eun ;
Pyun, Young-Sik .
SURFACE & COATINGS TECHNOLOGY, 2012, 207 :135-142
[7]  
Bhushan B., 1996, TRIBOLOGY MECH MAGNE, DOI 10.1007/978-1-4612-2364-1
[8]   Influence of hardness on the wear resistance of 17-4 PH stainless steel evaluated by the pin-on-disc testing [J].
Bressan, J. D. ;
Daros, D. P. ;
Sokolowski, A. ;
Mesquita, R. A. ;
Barbosa, C. A. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 205 (1-3) :353-359
[9]   Study of PVD AlCrN Coating for Reducing Carbide Cutting Tool Deterioration in the Machining of Titanium Alloys [J].
Cadena, Natalia L. ;
Cue-Sampedro, Rodrigo ;
Siller, Hector R. ;
Arizmendi-Morquecho, Ana M. ;
Rivera-Solorio, Carlos I. ;
Di-Nardo, Santiago .
MATERIALS, 2013, 6 (06) :2143-2154
[10]  
Chowdhury M.A., 2011, Int. J. Mechanical Mechatronics Engineering. Int. J. of Engineering Sciences, V11, P53
1234