The influence of filler treatment on the mechanical properties and phase behavior of thermoplastic polyurethane/polypropylene blends

被引：14

作者：

Bajsic, Emi Govorcin ^{[1
]}

Filipan, Veljko ^{[1
]}

Bulatovic, Vesna Ocelic ^{[1
]}

Mandic, Vilko ^{[1
]}

机构：

[1] Univ Zagreb, Fac Chem Engn & Technol, Marulicev Trg 19,POB 177, Zagreb 10000, Croatia

来源：

POLYMER BULLETIN | 2017年 / 74卷 / 08期

关键词：

Blends; Thermoplastic polyurethane; Polypropylene; Talc; Silane coupling agents; Mechanical properties; POLYPROPYLENE COMPOSITES; TALC; POLYMERS; POLYURETHANE; MORPHOLOGY; KINETICS; SILANE;

D O I：

10.1007/s00289-016-1879-9

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

Thermoplastic polyurethane (TPU) and isotactic polypropylene (iPP) composites and their talc reinforced blends containing untreated and silane treated talc were investigated. The talc surface was modified with organosilane coupling agent in order to improve the polymer-filler interface interaction. TPU has been blended with iPP in a twin screw extruder and samples for investigation were prepared by injection moulding at different concentrations. The neat polymers, composites and blends were characterized with DMA, XRD, FTIR and tensile testing. The obtained results showed that mechanical properties of the talc filled TPU and iPP composites and TPU/iPP blends were improved with the addition of untreated and silane treated talc. The storage modulus of the TPU/iPP blends increased with the addition of untreated and silane treated talc, due to a stiffer interface which talc generated in the polymer matrix. The comparison among samples filled with untreated and silane treated talc filler showed that the polymer composites and TPU/iPP blends filled with silane treated talc displayed better mechanical properties. Silane addition improves the adhesion between the filler and the polymer matrix.

引用

页码：2939 / 2955

页数：17

共 28 条

[1] The influence of filler treatment on the properties of TPU/PP Blends: I. Thermal properties and stability [J].

Bajsic, Emi Govorcin ;

Bulatovic, Vesna Ocelic ;

Rek, Vesna .

POLYMER ENGINEERING AND SCIENCE, 2015, 55 (08) :1920-1930

[2] HYDROGEN-BONDING IN POLYMERS .4. INFRARED TEMPERATURE STUDIES OF A SIMPLE POLYURETHANE [J].

COLEMAN, MM ;

LEE, KH ;

SKROVANEK, DJ ;

PAINTER, PC .

MACROMOLECULES, 1986, 19 (08) :2149-2157

[3]

Danec M, 2005, APPL SCI MANUF, V36, P1094, DOI [10.1016/j.compositesa.2005.01.022, DOI 10.1016/J.COMPOSITESA.2005.01.022]

[4] Dynamic mechanical analysis of injection-moulded discs of polypropylene and untreated and silane-treated talc-filled polypropylene composites [J].

Díez-Gutiérrez, S ;

Rodríguez-Pérez, MA ;

De Saja, JA ;

Velasco, JI .

POLYMER, 1999, 40 (19) :5345-5353

[5]

Dillon J.G., 1989, INFRARED SPECTROSCOP

[6] STRUCTURES AND PROPERTIES OF INJECTION MOLDINGS OF CRYSTALLIZATION NUCLEATOR-ADDED POLYPROPYLENES .1. STRUCTURE PROPERTY RELATIONSHIPS [J].

FUJIYAMA, M ;

WAKINO, T .

JOURNAL OF APPLIED POLYMER SCIENCE, 1991, 42 (10) :2739-2747

[7] CRYSTAL ORIENTATION IN INJECTION-MOLDING OF TALC-FILLED POLYPROPYLENE [J].

FUJIYAMA, M ;

WAKINO, T .

JOURNAL OF APPLIED POLYMER SCIENCE, 1991, 42 (01) :9-20

[8] PHOTOLYSIS OF SEGMENTED POLYURETHANES - THE ROLE OF HARD-SEGMENT CONTENT AND HYDROGEN-BONDING [J].

HOYLE, CE ;

KIM, KJ ;

NO, YG ;

NELSON, GL .

JOURNAL OF APPLIED POLYMER SCIENCE, 1987, 34 (02) :763-774

[9]

Jancar J, 1996, CHEM PAP, V50, P228

[10] Comparison of the techniques used to modify amorphous hydrated silicas [J].

Jesionowski, T ;

Krysztafkiewicz, A .

JOURNAL OF NON-CRYSTALLINE SOLIDS, 2000, 277 (01) :45-57

← 1 2 3 →