Numerical analysis of viscous elastohydrodynamic point contact under stationary conditions

被引:3
作者
Goryacheva, I. G. [1 ]
Usov, P. P. [2 ]
机构
[1] Russian Acad Sci, Ishlinskii Inst Problems Mech, Moscow 119526, Russia
[2] Moscow State Inst Elect Engn, Moscow 124498, Russia
基金
俄罗斯基础研究基金会;
关键词
viscoelastic layer; Kelvin model; point contact; lubricant film; friction coefficient;
D O I
10.3103/S1068366610010010
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
A model is proposed for study of the effect of nonelastic qualities of contacting bodies separated by a fine lubricant film on the contact characteristics. The problem is studied of the movement of the fine lubricant film between the rigid spherical surface and the mobile viscoelastic-layer surface rigidly adhering to the base. A unidimensional Kelvin model of the viscoelastic medium serves as the rheological model of the viscoelastic layer. The calculation results show that the pressure is distributed in the viscous elastohydrodynamic point contact film very much differently from the pressure distribution in the UHD contact, particularly at slow sliding velocities. The friction coefficient is a nonmonotonous function of the sliding velocity. The friction coefficient drops at slow velocities to a minimum as the velocity accelerates, and then it grows.
引用
收藏
页码:1 / 10
页数:10
相关论文
共 50 条
[41]   Meshing theory and performance analysis of point-contact conjugate involute worm gear pair [J].
Ren, Wen ;
Li, Jie ;
Wang, Tianyu ;
Li, Haitao .
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2024, 50 (10) :3183-3195
[42]   Numerical Simulation of Deep-drawing Processes of Square Cup under Bilateral Constrained Conditions [J].
Xiao, Xiaoting ;
Huang, Licheng ;
Liao, Yijuan ;
Tan, Liguang ;
Chen, Qiaoyu .
MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 :2892-2896
[43]   Measuring method of three thermophysical parameters of solids by a thermal probe with instantaneous point contact: Discussion about applicability and measuring conditions [J].
Takahashi, Ichiro ;
Emori, Masaaki .
Heat Transfer - Asian Research, 2003, 32 (03) :202-211
[44]   Analysis on the Hydroplaning of Aircraft Tire Under Real Texture Pavement Conditions [J].
Zhu X.-Y. ;
Pang Y.-F. ;
Yang J. ;
Zhao H.-D. .
Zhao, Hong-Duo (hdzhao@tongji.edu.cn), 1600, Chang'an University (33) :159-170
[45]   Analysis of friction coefficient evolutions on coated systems under sliding conditions [J].
Kim, Kyungmok .
WEAR, 2010, 269 (9-10) :655-663
[46]   Analysis of Interactions Between Frictional Contact and Operating Conditions in Piezoelectric Stick-Slip Actuator [J].
Berry, Dipika ;
Khanh, Vo Tran Vy ;
Lubecki, Tomasz Marek ;
Gupta, Amit ;
Li, King Ho Holden .
IEEE ACCESS, 2024, 12 :175616-175626
[47]   Thermal point contact EHL analysis of rolling/sliding contacts with experimental comparison showing anomalous film shapes [J].
Carli, M. ;
Sharif, K. J. ;
Ciulli, E. ;
Evans, H. R. ;
Snidle, R. W. .
TRIBOLOGY INTERNATIONAL, 2009, 42 (04) :517-525
[48]   Numerical study of laminar flow and friction characteristics in narrow channels under rolling conditions using MPS method [J].
Basit, Muhammad Abdul ;
Tian, Wenxi ;
Chen, Ronghua ;
Qiu, Suizheng ;
Su, Guanghui .
NUCLEAR ENGINEERING AND TECHNOLOGY, 2019, 51 (08) :1886-1896
[49]   Friction analysis during deformation of steels under hot-working conditions [J].
Serebriakov, Ivan ;
Puchi-Cabrera, Eli Saul ;
Dubar, Laurent ;
Moreau, Philippe ;
Meresse, Damien ;
La Barbera-Sosa, Jose Gregorio .
TRIBOLOGY INTERNATIONAL, 2021, 158
[50]   Comparisons of Tribological and Vibration Behaviors of Textured Point Contacts of Bearing Steel Lubricated With Oil and Grease Under Starved Conditions [J].
Sudeep, U. ;
Tandon, N. ;
Pandey, R. K. .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2016, 138 (03)