Composition, structure and optical properties of SiC buried layer formed by high dose carbon implantation into Si using metal vapor vacuum arc ion source

被引:10
|
作者
Chen, DH [1 ]
Wong, SP
Yang, SH
Mo, D
机构
[1] Zhongshan Univ, Sch Phys & Engn, Guangzhou 510275, Peoples R China
[2] Chinese Univ Hong Kong, Dept Elect Engn, Hong Kong, Hong Kong, Peoples R China
[3] Chinese Univ Hong Kong, Mat Technol Res Ctr, Hong Kong, Hong Kong, Peoples R China
[4] Chinese Acad Sci, Shanghai Inst Microsyst & Informat Technol, Shanghai 200083, Peoples R China
关键词
silicon carbide; ion implantation; X-ray photoelectron spectroscopy; ellipsometry;
D O I
10.1016/S0040-6090(02)01298-1
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
High dose carbon implantation into silicon to form a beta-SiC buried layer has been performed by using a metal vapor vacuum arc ion source. The implantation energy and dose are 65 keV and I X 10(18) ions cm(-2), respectively. Post-implantation thermal annealing was carried out at 1250 degreesC for various time intervals in Ar ambient. The composition depth profile, chemical state of C and Si atoms, microstructure and optical properties of the samples have been studied using X-ray photoelectron spectroscopy, Fourier transform IR spectroscopy, cross-section transmission electron microscopy and spectroscopic ellipsometry. For the as-implanted sample, the carbon depth profile shows a Gaussian shape-like distribution with a maximum concentration exceeding the stoichiometric ratio. A clear redistribution of the implanted carbon from the Gaussian shape-like distribution to the two sides is observed during annealing. After annealing at 1250 degreesC for 10 h, a stoichiometric SiC buried layer of approximately 150 nm is formed. Results show the annealed sample is a multi-layered structure of SiO2 surface layer/Si top layer/damaged Si layer/upper interface layer/beta-SiC buried layer/lower interface layer on Si substrate. The optical constants of the beta-SiC buried layer formed by ion beam synthesis are determined from simulation of the measured ellipsometric spectra (2.3-5.0 eV) using an appropriate multi-layered model and the Bruggeman effective medium approximation. (C) 2002 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:1 / 7
页数:7
相关论文
共 28 条
  • [21] FORMATION OF A COSI2 LAYER BY CO ION-IMPLANTATION USING A METAL VAPOR VACUUM ARE ION-SOURCE
    ZHU, DH
    CHEN, YG
    LIU, BX
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1995, 101 (04): : 394 - 399
  • [22] Characterization and light emission properties of β-FeSi2 precipitates in Si synthesized by metal vapor vacuum arc ion implantation
    Gao, Y
    Wong, SP
    Cheung, WY
    Shao, G
    Homewood, KP
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2003, 206 : 317 - 320
  • [23] TEM, AES AND XPS STUDIES OF SI LAYER ON BURIED SIO2 LAYER FORMED BY HIGH-DOSE OXYGEN ION-IMPLANTATION
    HAYASHI, T
    MAEYAMA, S
    YOSHII, S
    JAPANESE JOURNAL OF APPLIED PHYSICS, 1980, 19 (06) : 1111 - 1116
  • [24] THE OPTICAL-PROPERTIES OF SIOX FORMED BY HIGH-DOSE SI ION-IMPLANTATION INTO FUSED-SILICA
    HEIDEMANN, KF
    RADIATION EFFECTS AND DEFECTS IN SOLIDS, 1982, 61 (3-4): : 235 - 246
  • [25] SYNTHESIS OF BETA-FESI2 AND ALPHA-FESI2 PHASES BY FE ION-IMPLANTATION INTO SI USING METAL VAPOR VACUUM-ARC ION-SOURCE
    LIU, BX
    ZHU, DH
    LU, HB
    PAN, F
    TAO, K
    JOURNAL OF APPLIED PHYSICS, 1994, 75 (08) : 3847 - 3854
  • [26] Effect of high-energy carbon ion implantation on Ti-Al-Si-N coatings by metal vapour vacuum arc
    Xu, Y. F.
    Shum, P. W.
    Zhou, Z. F.
    Li, K. Y.
    SURFACE & COATINGS TECHNOLOGY, 2010, 204 (12-13): : 1914 - 1918
  • [27] Metallization of ion beam synthesized Si/3C-SiC/Si layer systems by high-dose implantation of transition metal ions
    Lindner, JKN
    Wenzel, S
    Stritzker, B
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2001, 175 : 324 - 330
  • [28] Wear resistant and anti-corrosive treatment for TI-6AL-4V using metal vapor vacuum arc source in comparison with plasma immersion ion implantation
    Chang, Chia-Wei
    Liao, Jiunn-Der
    Chen, Huan-Jen
    Chang, Charlie S. F.
    Chiu, Song-Mao
    THIN SOLID FILMS, 2006, 515 (01) : 122 - 128