Rationally Designed Porous MnOx-FeOx Nanoneedles for Low-Temperature Selective Catalytic Reduction of NOx by NH3

In this work, a novel porous nanoneedlelike MnOx-FeOx catalyst (MnOx-FeOx nanoneedles) was developed for the first time by rationally heat-treating metal-organic frameworks including MnFe precursor synthesized by hydrothermal method. A counterpart catalyst (MnOx-FeOx nanoparticles) without porous nanoneedle structure was also prepared by a similar procedure for comparison. The two catalysts were systematically characterized by scanning and transmission electron microscopy, X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, hydrogen temperature programmed reduction, ammonia temperature-programmed desorption, and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFT), and their catalytic activities were evaluated by selective catalytic reduction (SCR) of NOx by NH3. The results showed that the rationally designed MnOx-FeOx nanoneedles presented outstanding low-temperature NH3-SCR activity (100% NOx conversion in a wide temperature window from 120 to 240 degrees C), high selectivity for N-2 (nearly 100% N-2 selectivity from 60 to 240 degrees C), and excellent water resistance and stability in comparison with the counterpart MnOx-FeOx nanoparticles. The reasons can be attributed not only to the unique porous nanoneedle structure but also to the uniform distribution of MnOx and FeOx. More importantly, the desired Mn4+/Mnn+ and O-alpha/(O-alpha + O-beta) ratios, as well as rich redox sites and abundant strong acid sites on the surface of the porous MnOx-FeOx nanoneedles, also contribute to these excellent performances. In situ DRIFT suggested that the NH3-SCR of NO over MnOx-FeOx nanoneedles follows both Eley-Rideal and Langmuir-Hinshelwood mechanisms.