Effect of axial length parameters of ovality on the collapse pressure of offshore pipelines

被引:42
作者
Fan, Zhiyuan [1 ,2 ]
Yu, Jianxing [1 ,2 ]
Sun, Zhenzhou [1 ,2 ]
Wang, Huakun [1 ,2 ]
机构
[1] Tianjin Univ, State Key Lab Hydraul Engn Simulat & Safety, Tianjin 300072, Peoples R China
[2] Shanghai Jiao Tong Univ, Collaborat Innovat Ctr Adv Ship & Deep Sea Explor, Shanghai 200240, Peoples R China
基金
中国国家自然科学基金;
关键词
Pipelines; Ovality length parameters; Collapse pressure; Composite defects; CYLINDRICAL-SHELLS; IMPROVED FORMULATION; CIRCULAR RINGS; CAPACITY LOAD;
D O I
10.1016/j.tws.2017.02.032
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Axial length parameters of ovality are observed to have effects on the buckling capacity of a pipeline through a parameter analysis. The collapse pressure measured was considerably higher than that calculated by offshore standard DNV-OS-F101 (DNV) when the axial length of ovality was shorter. Effects of composite defects in the form of corrosion ovality on collapse pressure were examined through combined experimental and numerical efforts. We find that the final collapsed configuration and buckling capacity of a pipe are not only affected by the amplitude of maximum ovality and geometric parameters of corrosion but also by their positions. Finally, an improved formula and procedure for estimating the collapse pressure of a pipe with composite defects is established.
引用
收藏
页码:19 / 25
页数:7
相关论文
共 21 条
[1]  
[Anonymous], 2012, DNVOSF101
[2]   Plasticity-instability coupling effects on the collapse of thick tubes [J].
Corradi, L ;
Luzzi, L ;
Trudi, F .
INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS, 2005, 5 (01) :1-18
[3]   ON THE LOCALIZATION OF COLLAPSE IN CYLINDRICAL-SHELLS UNDER EXTERNAL-PRESSURE [J].
DYAU, JY ;
KYRIAKIDES, S .
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1993, 30 (04) :463-482
[4]   Towards an accurate assessment of UOE pipes under external pressure: Effects of geometric imperfection and material inhomogeneity [J].
Fraldi, M. ;
Guarracino, F. .
THIN-WALLED STRUCTURES, 2013, 63 :147-162
[5]   An improved formulation for the assessment of the capacity load of circular rings and cylindrical shells under external pressure. Part 2. A comparative study with design codes prescriptions, experimental results and numerical simulations [J].
Fraldi, M. ;
Freeman, R. ;
Slater, S. ;
Walker, A. C. ;
Guarracino, F. .
THIN-WALLED STRUCTURES, 2011, 49 (09) :1062-1070
[6]   An improved formulation for the assessment of the capacity load of circular rings and cylindrical shells under external pressure. Part 1. Analytical derivation [J].
Fraldi, M. ;
Guarracino, F. .
THIN-WALLED STRUCTURES, 2011, 49 (09) :1054-1061
[7]   Stability Analysis of Circular Beams with Mixed-Mode Imperfections under Uniform Lateral Pressure [J].
Fraldi, Massimiliano ;
Guarracino, Federico .
ADVANCES IN MECHANICAL ENGINEERING, 2014,
[8]   Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure [J].
Gong, Shun-Feng ;
Chen, Yuan ;
Jin, Wei-Liang ;
Bai, Yong ;
Li, Zhi-Gang ;
Zhao, Dong-Yan .
Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2012, 46 (01) :14-19
[9]   Buckle interaction in deep subsea pipelines [J].
Karampour, Hassan ;
Albermani, Faris ;
Veidt, Martin .
THIN-WALLED STRUCTURES, 2013, 72 :113-120
[10]   On the effect of the U-O-E manufacturing process on the collapse pressure of long tubes [J].
Kyriakides, S. ;
Corona, E. ;
Fischer, F.J. .
Journal of engineering for industry, 1994, 116 (01) :93-100