Effects of warm peening on fatigue life and relaxation behaviour of residual stresses in AISI 4140 steel

被引：107

作者：

Wick, A ^{[1
]}

Schulze, V ^{[1
]}

Vöhringer, O ^{[1
]}

机构：

[1] Univ Karlsruhe TH, Inst Werkstoffkunde 1, D-76131 Karlsruhe, Germany

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2000年 / 293卷 / 1-2期

关键词：

warm peening; fatigue strength; residual stresses; strain ageing; steel;

D O I：

10.1016/S0921-5093(00)01035-2

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A new device has been built which allows shot peening in. an air blast machine at elevated temperatures. The effects of conventional shot :peening and peening at elevated temperatures on the characteristics of regions close to the surface, on the stability of residual stresses and half widths of X-ray interference lines and on the fatigue strength are presented for a quenched and tempered AISI 4140 steel (German grade 42CrMo4). The alternating bending strength is increased by warm peening compared with conventional shot peening. Additional investigations of samples conventionally peened and then annealed confirm that these effects are due to the stability of the dislocation structure, which is highly affected by strain ageing effects. This causes an additional benefit owing to higher stability of the residual stresses induced. (C) 2000 Elsevier Science S.A. All rights reserved.

引用

页码：191 / 197

页数：7

共 18 条

[1] Improvement of fatigue behaviour of mechanically surface treated materials by annealing [J].

Altenberger, I ;

Scholtes, B .

SCRIPTA MATERIALIA, 1999, 41 (08) :873-881

[2]

[Anonymous], 1975, ZF WERKSTOFFTECHNIK

[3]

[Anonymous], Z ANGEW MATH MECH

[4]

EIFLER D, 1981, THESIS U KARLSRUHE

[5] OPTIMAL AUCTIONS REVISITED [J].

ENGELBRECHTWIGGANS, R .

GAMES AND ECONOMIC BEHAVIOR, 1993, 5 (02) :227-239

[6] Residual stress relaxation in an AISI 4140 steel due to quasistatic and cyclic loading at higher temperatures [J].

Holzapfel, H ;

Schulze, V ;

Vohringer, O ;

Macherauch, E .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 248 (1-2) :9-18

[7]

HOLZAPFEL H, 1994, THESIS U KARLSRUHE

[8]

Macherauch E., 1961, Zeitschrift Fur Angew. Phys, V13, P305

[9]

Moore MG., 1958, SAE T, DOI [10.4271/580035, DOI 10.4271/580035]

[10]

SCHOLTES B, 1986, HARTEREI TECHN MITT, V41, P347

← 1 2 →