Safety analysis on truing process of solid propellant

被引:1
|
作者
Li, Jun [1 ,2 ]
Jiao, Qing-jie [1 ]
Ren, Hui [1 ]
机构
[1] Beijing Inst Technol, State Key Lab Explos Sci & Technol, Beijing 100081, Peoples R China
[2] Sci & Technol Aerosp Chem Power Lab, Xiangyang 441003, Peoples R China
来源
DEFENCE TECHNOLOGY | 2018年 / 14卷 / 05期
关键词
Solid propellant; Truing process; Safety; Finite element method;
D O I
10.1016/j.dt.2018.07.008
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In order to investigate safety character of solid propellant, the truing process was analyzed by a thermal-mechanical coupled finite element method. Based on the viscoelastic integral constitutive relation, the temperature response in truing process was calculated. The result showed that the maximum temperature in solid propellant truing process could attain up to 65 degrees C when the truing velocity was 10 mm/s and the truing thickness was 1 mm, and there was no remarkable temperature change under the truing thickness of 1.0 mm, 1.5mm and 2.5 mm. The hazard in truing process of solid propellant was mainly close to the edge of cutting area. (c) 2018 Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码:612 / 615
页数:4
相关论文
共 50 条
  • [41] STATISTICAL-ANALYSIS OF COMPOSITE SOLID-PROPELLANT COMBUSTION
    GLICK, RL
    AIAA JOURNAL, 1974, 12 (03) : 384 - 385
  • [42] Flow analysis of a solid propellant rocket motor with Aft fins
    Chaouat, B
    JOURNAL OF PROPULSION AND POWER, 1997, 13 (02) : 194 - 196
  • [43] THERMAL STRESS ANALYSIS OF SOLID-PROPELLANT GRAINS.
    Amijima, Sadao
    Shimizu, Norihiko
    Washida, Tadashi
    Transactions of the Japan Society for Aeronautical and Space Sciences, 1974, 17 (38) : 139 - 150
  • [44] Determination of the temperature in a solid propellant flame by analysis of emission spectra
    Eckl, Wilhelm
    Eisenreich, Norbert
    Propellants, Explosives, Pyrotechnics, 1992, 17 (04) : 202 - 206
  • [45] DEM‑CFD Simulation of Twin Screw Extrusion Process of Composite Solid Propellant
    Wang J.
    Liu H.
    Zhao Y.
    Qiao X.
    Li X.
    Zhao H.
    Hanneng Cailiao/Chinese Journal of Energetic Materials, 2022, 30 (02): : 138 - 145
  • [47] Dynamic Simulation of Insulation Material Ablation Process in Solid Propellant Rocket Motor
    Xu, Yi Hua
    Hu, Xu
    Yang, Yu Xin
    Zeng, Zhuo Xiong
    Hu, Chun Bo
    JOURNAL OF AEROSPACE ENGINEERING, 2015, 28 (05)
  • [48] Analysis of nonlinear pressure coupled response function of solid propellant
    Liu P.-J.
    Jin B.-N.
    Wei X.-G.
    Yang W.-J.
    Liu X.
    Ji X.-T.
    1601, Journal of Propulsion Technology (37): : 1601 - 1608
  • [49] Analysis on the failure mechanism of solid propellant under superimposed pressure
    Zhang L.
    Shen Z.
    Yu K.
    Guofang Keji Daxue Xuebao/Journal of National University of Defense Technology, 2022, 44 (06): : 6 - 13
  • [50] The instability of the working process in the combustion chamber of a solid-propellant rocket engine
    Davydov, YM
    Egorov, MY
    DOKLADY PHYSICS, 2001, 46 (03) : 195 - 198