Safety analysis on truing process of solid propellant

被引:1
|
作者
Li, Jun [1 ,2 ]
Jiao, Qing-jie [1 ]
Ren, Hui [1 ]
机构
[1] Beijing Inst Technol, State Key Lab Explos Sci & Technol, Beijing 100081, Peoples R China
[2] Sci & Technol Aerosp Chem Power Lab, Xiangyang 441003, Peoples R China
来源
DEFENCE TECHNOLOGY | 2018年 / 14卷 / 05期
关键词
Solid propellant; Truing process; Safety; Finite element method;
D O I
10.1016/j.dt.2018.07.008
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In order to investigate safety character of solid propellant, the truing process was analyzed by a thermal-mechanical coupled finite element method. Based on the viscoelastic integral constitutive relation, the temperature response in truing process was calculated. The result showed that the maximum temperature in solid propellant truing process could attain up to 65 degrees C when the truing velocity was 10 mm/s and the truing thickness was 1 mm, and there was no remarkable temperature change under the truing thickness of 1.0 mm, 1.5mm and 2.5 mm. The hazard in truing process of solid propellant was mainly close to the edge of cutting area. (c) 2018 Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码:612 / 615
页数:4
相关论文
共 50 条
  • [21] THERMOVISCOELASTIC ANALYSIS OF AXISYMMETRIC SOLID-PROPELLANT GRAINS
    SANKARAN, GV
    JANA, MK
    JOURNAL OF SPACECRAFT AND ROCKETS, 1976, 13 (11) : 641 - 642
  • [22] Method of FEA for reliability analysis of solid propellant grains
    School of Mechanical Engineering, NUST, Nanjing 210094, China
    Dandao Xuebao, 2008, 3 (13-15):
  • [24] ANALYSIS OF A SIMPLIFIED MODEL OF SOLID PROPELLANT RESONANT BURNING
    NACHBAR, W
    GREEN, L
    JOURNAL OF THE AEROSPACE SCIENCES, 1959, 26 (08): : 518 - 526
  • [25] Numerical simulation on transient working process of a solid propellant micro thruster
    Li, Teng
    Fang, Shu-Zhou
    Liu, Xu-Hui
    Ma, Hong-Peng
    Tang, Xu
    Zhao, Ting
    Guti Huojian Jishu/Journal of Solid Rocket Technology, 2013, 36 (05): : 613 - 619
  • [26] THERMOVISCOELASTIC ANALYSIS OF AXISYMMETRIC SOLID-PROPELLANT GRAINS
    SANKARAN, GV
    JANA, MK
    ASTRONAUTICS & AERONAUTICS, 1976, 14 (06): : B25 - B25
  • [27] Preliminary analysis on properties of solid cool gas propellant
    School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing
    210094, China
    不详
    100080, China
    Tuijin Jishu, 1 (181-187):
  • [28] THERMAL ANALYSIS OF EXPLOSIVES AND SOLID PROPELLANT INGREDIENTS - ANAL
    MAYCOCK, JN
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1970, (FEB): : 78 - &
  • [29] Numerical analysis of solid propellant initial temperature effects on differential pressure fluctuations in propellant chamber
    Miura, Hiroaki
    Matsuo, Akiko
    Nakamura, Yuichi
    SCIENCE AND TECHNOLOGY OF ENERGETIC MATERIALS, 2010, 71 (5-6) : 151 - 157
  • [30] SOLID PROPELLANT BIBLIOGRAPHY
    ZAEHRINGER, AJ
    JET PROPULSION, 1957, 27 (08): : 900 - 927