Surface integrity in finish hard turning of case-hardened steels

被引：154
作者：
Rech, J
Moisan, A
机构：
[1] Ecole Natl Ingn St Etienne, LTDS, F-42000 St Etienne, France
[2] Ecole Natl Super Arts & Metiers, LABOMAP, F-71250 Cluny, France
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2003年 / 43卷 / 05期
关键词：
hard turnings; residual stresses; white layers; surface integrity;
D O I：
10.1016/S0890-6955(02)00141-4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Highly stressed steel components, e.g., gears and bearing parts, are appropriate applications for hard turning. Therefore, the process effects on significant engineering properties of work materials have to be carefully analyzed. Roughness, residual stresses, and white layers as parts of surface integrity, are functions of the machining parameters and of the cuttability of the cutting edge, i.e. of the tool wear. The aim of this work was to study the influence of feed rate, cutting speed, and tool wear on the effects induced by hard turning on case-hardened 27MnCr5 gear conebrakes and to point out the technical limitations in mass production. (C) 2003 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：543 / 550
页数：8
相关论文
共 50 条
  • [31] Numerical analysis of the effect of tool wear on surface integrity during hard turning
    Rupak Kumar Nayak
    Gaurav Bartarya
    Manas Ranjan Sahoo
    Journal of Mechanical Science and Technology, 2021, 35 : 1215 - 1222
  • [32] Investigation of Residual Stresses in Case of Hard Turning of Case Hardened 16MnCr5 Steel
    Szabo, Gergely
    Kundrak, Janos
    PRECISION MACHINING VII, 2014, 581 : 501 - 504
  • [33] Influence of part's stiffness on surface integrity induced by a finish turning operation of a 15-5PH stainless steel
    Chomienne, Vincent
    Valiorgue, Frederic
    Rech, Joel
    Verdu, Catherine
    3RD CIRP CONFERENCE ON SURFACE INTEGRITY, 2016, 45 : 19 - 22
  • [34] Surface integrity of Inconel 718 when finish turning with PVD coated carbide tool under MQL
    Yazid, M. Z. A.
    CheHaron, C. H.
    Ghani, J. A.
    Ibrahim, G. A.
    Said, A. Y. M.
    1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2011, 19
  • [35] Tool wear and surface integrity during high-speed turning of hardened steel with polycrystalline cubic boron nitride tools
    Kishawy, HA
    Elbestawi, MA
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2001, 215 (06) : 755 - 767
  • [36] Dry Hard Turning versus Grinding-The Influence of Machining-Induced Surface Integrity on Fatigue Performance
    Zhang, Yinxia
    Yuan, Shaoshuai
    Yang, Xin
    Gao, Wei
    Zhang, Mingliang
    Peng, Zhenlong
    COATINGS, 2023, 13 (05)
  • [37] FEM and experimental analysis to study the effect of tool wear on the surface integrity of finish hard turned EN31 steel
    Bartarya, Gaurav
    Choudhury, S. K.
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2024, 49 (02):
  • [38] The Influence of Tool Rake Surface Geometry on the Hard Turning Process of AISI52100 Hardened Steel
    Xu, Hanzhong
    Zhou, Honggen
    Ma, Zhengyu
    Dai, Lei
    Jing, Xuwen
    Li, Guochao
    Sun, Yujing
    MATERIALS, 2019, 12 (19)
  • [39] Bending fatigue design of case-hardened gears based on test specimens
    Meneghetti, Giovanni
    Dengo, Carlo
    Lo Conte, Fulvio
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2018, 232 (11) : 1953 - 1969
  • [40] Impact of superfinish turning on surface integrity of pure copper
    Bissey-Breton, S.
    Gravier, J.
    Vignal, V.
    1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2011, 19
12345