Microstructural evolution and mechanical properties of friction stir processed ZrB2/6061Al nanocomposites

被引：39
作者：
Zhang, Z. Y. [1 ]
Yang, R. [2 ]
Li, Y. [1 ]
Chen, G. [1 ]
Zhao, Y. T. [1 ]
Liu, M. P. [1 ]
机构：
[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Peoples R China
[2] Zhenjiang Coll, Sch Transportat, Zhenjiang 212013, Peoples R China
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2018年 / 762卷
关键词：
Metal matrix composites; Friction stir processing; Microstructure; Mechanical properties; IN-SITU; GRAIN-STRUCTURE; DYNAMIC RECRYSTALLIZATION; MATRIX COMPOSITES; ALUMINUM; FABRICATION; PARTICLES; BEHAVIOR; TEXTURE; DISPERSION;
D O I：
10.1016/j.jallcom.2018.05.216
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
In the present work, homogeneously dispersed ZrB2 nanoparticles and fine-grained structures were successfully achieved by friction stir processing (FSP) of in situ 0-2 vol% ZrB2/6061Al nanocomposites. The effects of ZrB2 additions on the microstructures and tensile properties were investigated. A combination of EBSD and TEM analyses revealed that ZrB2 nanoparticles strongly suppressed (sub)grain boundary migration and/or orientation, and thus led to a continuous decrease in grain size, HAGBs fraction as well as B/B shear texture intensity at higher ZrB2 content. Moreover, compared with the processed 6061Al alloy, microhardness, strengths and elongation of the FSPed composites were significantly improved mainly due to the refined grains and ZrB2 nanodispersoids. Quantitative calculation indicated that as ZrB2 content increased, Orowan strengthening instead of grain refinement strengthening contributed the most to the yield strength. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码：312 / 318
页数：7
相关论文
共 40 条
  • [11] A review of dynamic recrystallization phenomena in metallic materials
    Huang, K.
    Loge, R. E.
    [J]. MATERIALS & DESIGN, 2016, 111 : 548 - 574
  • [12] Friction stir processing of Al/SiC composites fabricated by powder metallurgy
    Izadi, H.
    Nolting, A.
    Munro, C.
    Bishop, D. P.
    Plucknett, K. P.
    Gerlich, A. P.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2013, 213 (11) : 1900 - 1907
  • [13] Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles
    Jiang, Lin
    Yang, Hanry
    Yee, Joshua K.
    Mo, Xuan
    Topping, Troy
    Lavernia, Enrique J.
    Schoenung, Julie M.
    [J]. ACTA MATERIALIA, 2016, 103 : 128 - 140
  • [14] Fabrication of a new Al-Mg/graphene nanocomposite by multi-pass friction-stir processing: Dispersion, microstructure, stability, and strengthening
    Khodabakhshi, F.
    Arab, S. M.
    Svec, P.
    Gerlich, A. P.
    [J]. MATERIALS CHARACTERIZATION, 2017, 132 : 92 - 107
  • [15] Cryogenic friction-stir processing of ultrafine-grained Al-Mg-TiO2 nanocomposites
    Khodabakhshi, F.
    Gerlich, A. P.
    Simchi, A.
    Kokabi, A. H.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 620 : 471 - 482
  • [16] Particle-reinforced aluminum matrix composites produced from powder mixtures via friction stir processing
    Lee, I. S.
    Hsu, C. J.
    Chen, C. F.
    Ho, N. J.
    Kao, P. W.
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2011, 71 (05) : 693 - 698
  • [17] Analysis of carbon nanotube shortening and composite strengthening in carbon nanotube/aluminum composites fabricated by multi-pass friction stir processing
    Liu, Z. Y.
    Xiao, B. L.
    Wang, W. G.
    Ma, Z. Y.
    [J]. CARBON, 2014, 69 : 264 - 274
  • [18] Microstructure and mechanical properties of friction stir processed Al-Mg-Si alloys dispersion-strengthened by nanosized TiB2 particles
    Ma, S. M.
    Zhang, P.
    Ji, G.
    Chen, Z.
    Sun, G. A.
    Zhong, S. Y.
    Ji, V.
    Wang, H. W.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 616 : 128 - 136
  • [19] Recrystallization mechanisms during friction stir welding/processing of aluminum alloys
    McNelley, T. R.
    Swaminathan, S.
    Su, J. Q.
    [J]. SCRIPTA MATERIALIA, 2008, 58 (05) : 349 - 354
  • [20] Effect of eutectic particles on the grain size control and the superplasticity of aluminium alloys
    Mikhaylovskaya, A. V.
    Ryazantseva, M. A.
    Portnoy, V. K.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (24): : 7306 - 7309
1234