Microstructural evolution and mechanical properties of friction stir processed ZrB2/6061Al nanocomposites

被引：39
作者：
Zhang, Z. Y. [1 ]
Yang, R. [2 ]
Li, Y. [1 ]
Chen, G. [1 ]
Zhao, Y. T. [1 ]
Liu, M. P. [1 ]
机构：
[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Peoples R China
[2] Zhenjiang Coll, Sch Transportat, Zhenjiang 212013, Peoples R China
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2018年 / 762卷
关键词：
Metal matrix composites; Friction stir processing; Microstructure; Mechanical properties; IN-SITU; GRAIN-STRUCTURE; DYNAMIC RECRYSTALLIZATION; MATRIX COMPOSITES; ALUMINUM; FABRICATION; PARTICLES; BEHAVIOR; TEXTURE; DISPERSION;
D O I：
10.1016/j.jallcom.2018.05.216
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
In the present work, homogeneously dispersed ZrB2 nanoparticles and fine-grained structures were successfully achieved by friction stir processing (FSP) of in situ 0-2 vol% ZrB2/6061Al nanocomposites. The effects of ZrB2 additions on the microstructures and tensile properties were investigated. A combination of EBSD and TEM analyses revealed that ZrB2 nanoparticles strongly suppressed (sub)grain boundary migration and/or orientation, and thus led to a continuous decrease in grain size, HAGBs fraction as well as B/B shear texture intensity at higher ZrB2 content. Moreover, compared with the processed 6061Al alloy, microhardness, strengths and elongation of the FSPed composites were significantly improved mainly due to the refined grains and ZrB2 nanodispersoids. Quantitative calculation indicated that as ZrB2 content increased, Orowan strengthening instead of grain refinement strengthening contributed the most to the yield strength. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码：312 / 318
页数：7
相关论文
共 40 条
  • [1] The generation of new high-angle boundaries in aluminium during hot torsion
    Barnett, MR
    Montheillet, F
    [J]. ACTA MATERIALIA, 2002, 50 (09) : 2285 - 2296
  • [2] Effect of friction stir processing (FSP) on microstructure and properties of Al-TiC in situ composite
    Bauri, Ranjit
    Yadav, Devinder
    Suhas, G.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (13-14): : 4732 - 4739
  • [3] Mechanical properties of Friction Stir Processed 2618/Al2O2O3/20p metal matrix composite
    Cavaliere, P
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2005, 36 (12) : 1657 - 1665
  • [4] Mechanical Properties of Nanometric Al2O3 Particulate-Reinforced Al-Al11Ce3 Composites Produced by Friction Stir Processing
    Chen, Chin-Fu
    Kao, Po-We
    Chang, Liuwen
    Ho, New-Jin
    [J]. MATERIALS TRANSACTIONS, 2010, 51 (05) : 933 - 938
  • [5] Development of TiB2 reinforced aluminum foundry alloy based in situ composites - Part I: An improved halide salt route to fabricate Al-5 wt%TiB2 master composite
    Chen, Zongning
    Wang, Tongmin
    Zheng, Yuanping
    Zhao, Yufei
    Kang, Huijun
    Gao, Lei
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 605 : 301 - 309
  • [6] Texture variations in an aluminum friction stir weld
    Fonda, R. W.
    Bingert, J. F.
    [J]. SCRIPTA MATERIALIA, 2007, 57 (11) : 1052 - 1055
  • [7] Aluminium based in-situ composite fabrication through friction stir processing: A review
    Gangil, Namrata
    Siddiquee, Arshad Noor
    Maheshwari, Sachin
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 715 : 91 - 104
  • [8] Influence of heat treatment on mechanical properties and microstructure of the Al2024/SiC composite produced by multi-pass friction stir processing
    Ghanbari, Davood
    Asgarani, Masoud Kasiri
    Amini, Kamran
    Gharavi, Farhad
    [J]. MEASUREMENT, 2017, 104 : 151 - 158
  • [9] Effects of nano-Al2O3 particle addition on grain structure evolution and mechanical behaviour of friction-stir-processed Al
    Guo, J. F.
    Liu, J.
    Sun, C. N.
    Maleksaeedi, S.
    Bi, G.
    Tan, M. J.
    Wei, J.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 602 : 143 - 149
  • [10] Al-Al3Ti nanocomposites produced in situ by friction stir processing
    Hsu, C. J.
    Chang, C. Y.
    Kao, P. W.
    Ho, N. J.
    Chang, C. P.
    [J]. ACTA MATERIALIA, 2006, 54 (19) : 5241 - 5249
1234