Carboxylated multiwalled carbon nanotubes effect on dynamic mechanical behavior of soft films composed of multilayer polymer structure

被引:17
作者
Zahedi, Farzad [1 ]
Amraee, Iraj Amiri [2 ]
机构
[1] Composite Res Ctr Iran, Tehran, Iran
[2] MalekAshtar Univ Technol, Dept Mat Sci & Mfg Technol, Tehran, Iran
关键词
Multiwalled carbon nanotube; Multilayer polymer; Dynamic mechanic property; Interfacial adhesion; NANOCOMPOSITES; POLYETHYLENE; MORPHOLOGY; MODULUS;
D O I
10.1016/j.polymer.2018.07.044
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Dynamic mechanical properties due to incorporation of carboxylated multiwalled carbon nanotubes into three-layer polymer structure, with high damping property, via in situ emulsion polymerization and also blending are studied in detail. Using of storage modulus, loss modulus and damping behavior obtained from the DMA was investigated the manner of carboxylated MWCNTs into and onto the three-layer polymer structure. It was observed that different morphology and topology were formed using these two manufacturing methods. Also, it was observed that dynamic mechanical and damping properties are due to complex and multifunctional parameters such as adhesion, constrained chains, molecular optimum mobility between polymer and nanotubes. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码:187 / 196
页数:10
相关论文
共 32 条
  • [11] SINGLE-SHELL CARBON NANOTUBES OF 1-NM DIAMETER
    IIJIMA, S
    ICHIHASHI, T
    [J]. NATURE, 1993, 363 (6430) : 603 - 605
  • [12] Dynamic mechanical properties of short sisal fibre reinforced polypropylene composites
    Joseph, PV
    Mathew, G
    Joseph, K
    Groeninckx, G
    Thomas, S
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2003, 34 (03) : 275 - 290
  • [13] Electrically conductive polymers and composites for biomedical applications
    Kaur, Gagan
    Adhikari, Raju
    Cass, Peter
    Bown, Mark
    Gunatillake, Pathiraja
    [J]. RSC ADVANCES, 2015, 5 (47): : 37553 - 37567
  • [14] Fabrication of flexible, aligned carbon nanotube/polymer composite membranes by in-situ polymerization
    Kim, Sangil
    Fornasiero, Francesco
    Park, Hyung Gyu
    Bin In, Jung
    Meshot, Eric
    Giraldo, Gabriel
    Stadermann, Michael
    Fireman, Micha
    Shan, Jerry
    Grigoropoulos, Costas P.
    Bakajin, Olgica
    [J]. JOURNAL OF MEMBRANE SCIENCE, 2014, 460 : 91 - 98
  • [15] SORPTION OF WATER IN NYLON-6 CLAY HYBRID
    KOJIMA, Y
    USUKI, A
    KAWASUMI, M
    OKADA, A
    KURAUCHI, T
    KAMIGAITO, O
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1993, 49 (07) : 1259 - 1264
  • [16] Melt mixed SWCNT-polypropylene composites with very low electrical percolation
    Krause, Beate
    Poetschke, Petra
    Ilin, Evgeniy
    Predtechenskiy, Mikhail
    [J]. POLYMER, 2016, 98 : 45 - 50
  • [17] Mechanical analysis of functionally graded carbon nanotube reinforced composites: A review
    Liew, K. M.
    Lei, Z. X.
    Zhang, L. W.
    [J]. COMPOSITE STRUCTURES, 2015, 120 : 90 - 97
  • [18] Polypropylene-based melt mixed composites with singlewalled carbon nanotubes for thermoelectric applications: Switching from p-type to n-type by the addition of polyethylene glycol
    Luo, Jinji
    Cerretti, Giacomo
    Krause, Beate
    Zhang, Long
    Otto, Thomas
    Jenschke, Wolfgang
    Ullrich, Mathias
    Tremel, Wolfgang
    Voit, Brigitte
    Poetschke, Petra
    [J]. POLYMER, 2017, 108 : 513 - 520
  • [19] Murayama T., 1978, DYNAMIC MECH ANAL PO
  • [20] The comparison between the effects of solvent casting and melt intercalation mixing processes on different characteristics of polylactide-nanographite platelets composites
    Narimissa, Esmaeil
    Gupta, Rahul K.
    Kao, Nhol
    Choi, Hyoung Jin
    Bhattacharya, Sati N.
    [J]. POLYMER ENGINEERING AND SCIENCE, 2015, 55 (07) : 1560 - 1570