Development of an aggregate indicator to assess the machinability of steels

被引：10

作者：

Boubekri, N ^{[1
]}

Rodriguez, J ^{[1
]}

Asfour, S ^{[1
]}

机构：

[1] Univ Miami, Dept Ind Engn, Coral Gables, FL 33124 USA

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2003年 / 134卷 / 02期

关键词：

machinability; machinability testing; cutting forces; surface roughness; TOOL WEAR; FORCE;

D O I：

10.1016/S0924-0136(02)00446-6

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A methodology for the machinability assessment of steel is proposed based on the direct measurement of cutting forces and surface roughness, along with the development of an aggregate machinability indicator. Experimental work for the verification of the validity of this testing scheme was carried out at different cutting condition combinations using three grades of steel, namely, 1018 (Low Carbon, Cold-Rolled Steel), 304 (Austenitic Stainless Steel), and 4140 (Low-Alloy Steel) and uncoated carbide inserts as the tool material. Mathematical models are developed for predicting the forces acting on the tool for different cutting conditions and materials. The test results show that the developed indicator provides a number of advantages: (1) an adequate estimate of a material's machinability; (2) a cost effective method for machinability testing. (C) 2002 Elsevier Science B.V. All rights reserved.

引用

页码：159 / 165

页数：7

共 23 条

[1]

BHATTACHARYYA A, 1970, IND ENG SERIES B, V91, P790

[2]

BROWN G, 1987, INT J MACH TOOLS MAN, V27

[3]

BRUSSO M, 1993, J MATER PROCESS TECH, V37, P613

[4] Force parameters for on-line tool wear estimation: A neural network approach [J].

Das, S ;

Chattopadhyay, AB ;

Murthy, ASR .

NEURAL NETWORKS, 1996, 9 (09) :1639-1645

[5]

DeGarmo B.a.K., 1997, Materials and Processes in Manufacturing, V8th

[6]

ETHERIDGE RA, 1970, ANN CIRP, V18, P107

[7]

EWELL JR, 1997, 67200 MR SOC MAN ENG

[8]

Groover M.P., 1996, FUNDAMENTALS MODERN

[9]

GROOVER MP, 1976, MR76269 SOC MAN ENG

[10]

Hicks C. R., 1999, FUNDAMENTAL CONCEPTS

← 1 2 3 →