Effects of creep characteristics of natural gas hydrate-bearing sediments on wellbore stability

Natural gas hydrate (NGH) reservoirs consist of the types of sediments with weak cementation, low strength, high plasticity, and high creep. Based on the kinetics and thermodynamic characteristics of NGH decomposition, herein a heat -fluid-solid coupling model was established for studying the wellbore stability in an NGH-bearing formation to analyze the effects of the creep characteristics of NGH-bearing sediments during long-term drilling. The results demonstrated that the creep characteristics of sediments resulted in larger plastic yield range, thus aggravating the plastic strain accumulation around the wellbore. Furthermore, the creep characteristics of NGH-bearing sediments could enhance the effects induced by the difference in horizontal in situ stress, as a result, the plastic strain in the formation around the wellbore increased nonlinearly with increasing difference in in situ stress. The lower the pore pressure, the greater the stress concentration effects and the higher the plastic strain at the wellbore. Moreover, the lower the initial NGH saturation, the greater the initial plastic strain and yield range and the higher the equivalent creep stress. The plastic strain at the wellbore increased nonlinearly with decreasing initial saturation. (c) 2021 The Authors. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/ 4.0/).